0
0

Hornady Custom Grade 25 Creedmoor Bullet Seating Die #44104

UPC: 090255441048

$29.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you're building your own 25 Creedmoor loads, the seating die is where a lot of your accuracy gets locked in, and this Hornady Custom Grade New Dimension unit is one of the better values out there. It's a single seater die cut for the .257 bullet, with 7/8-14 threads that fit any standard single-stage or progressive press. Hornady machines these from select heat-treated steel and backs them with a guarantee against breaking or wearing out under normal use, which tells you they're built to run for the long haul.

What the 25 Creedmoor Seating Die Brings to the Bench

The heart of this die is Hornady's in-line seating system. A floating bullet alignment sleeve and a floating steel seating stem hold the bullet, the case neck, and the stem in alignment before the bullet ever starts into the case mouth. That pre-alignment is what keeps runout down and seating depth consistent round to round, and it goes a long way toward squeezing better groups out of a 25 Creed. The seater adjustment screw makes dialing in your overall length simple, and a compression lock o-ring gives you the tension you need for fine adjustments without the setting creeping on you.

Crimp Options and Setup on the 25 Creedmoor Die

There's a built-in crimp ring inside the die. You can use it to put a light crimp on your loaded rounds, or raise it out of the way if you prefer to run no crimp at all, which is common with a bolt-gun cartridge like the 25 Creedmoor. The Sure-Loc lock ring clamps around the whole die body and locks down with a screw that never touches the threads, so you won't bugger up the die when you snug it. A retainer ring lets you pull the internals in seconds for cleaning.

Keep in mind this is the seating die only, so you'll want a matching full-length sizing die and the correct shellholder to complete your setup if you don't already have them.

Key Specifications

  • Manufacturer: Hornady
  • Manufacturer Part Number: 44104
  • UPC: 090255441048
  • Cartridge: 25 Creedmoor
  • Bullet Diameter: .257 in
  • Die Type: Bullet Seating Die
  • Number of Dies: 1
  • Thread Size: 7/8-14
  • Series: Custom Grade New Dimension
  • Construction: Heat-treated steel
  • Lock Ring: Sure-Loc with wrench flats
  • Crimp: Built-in crimp ring, can be raised for no crimp
  • Shellholder Included: No
  • Storage Box Included: Yes

What’s Included

  • Hornady Custom Grade 25 Creedmoor bullet seating die
  • Sure-Loc lock ring (installed)
  • Floating bullet alignment sleeve
  • Floating steel seating stem
  • Plastic storage box

Frequently Asked Questions

Is a sizing die or shellholder included with the 25 Creedmoor seating die?

No. This is the seating die only, and it does not include a shellholder. If you're reloading 25 Creedmoor from scratch, you'll also want a full-length sizing die and the correct shellholder for the cartridge, both sold separately.

Will this Hornady die fit my press?

Yes, it uses standard 7/8-14 threads, which is the common size for single-stage and progressive reloading presses. It threads right in just like any other Hornady Custom Grade die.

Can I load without crimping using this die?

Absolutely. The die has a built-in crimp ring that you can use for a light crimp, or you can raise it out of the way to seat with no crimp. Many handloaders running a bolt-action 25 Creedmoor skip the crimp for better consistency.

What does the floating alignment sleeve do for accuracy?

The floating sleeve and steel seating stem hold the bullet, case neck, and stem in line before the bullet enters the case mouth. That keeps your seating depth consistent and reduces runout, which helps tighten up your groups on paper.

Additional information

UPC

090255441048

Manufacturer

Manufacturer Part Number

044104

Reviews

There are no reviews yet.

Be the first to review “Hornady Custom Grade 25 Creedmoor Bullet Seating Die #44104”