Description
This is EGW's heavy-duty one-piece Picatinny base built specifically for the Kimber 84 and 84M short action. If you've been fighting with two-piece bases or a factory setup that won't hold zero, this rail gives your optic a continuous, uninterrupted platform to clamp onto. It's a straightforward upgrade that takes the guesswork out of getting your scope mounted square and keeping it there.
EGW machines this rail from a solid block of 7075-T6 aircraft-grade aluminum, which is noticeably stronger and stiffer than the 6061 you'll find on a lot of budget bases. The whole thing gets tumbled, sandblasted, and Type III hard-coat anodized for a tough matte black finish that holds up to weather and years of field use. The full-length Picatinny cross slots are cut to MIL-STD-1913 spec, so you've got room to slide your rings fore and aft to dial in eye relief no matter what scope you're running.
Why the 0 MOA Kimber 84 Rail Makes Sense
The 0 MOA cant is the right pick for most hunting and general-purpose shooting inside about 500 yards. There's no built-in elevation bias, so your scope has a full, balanced range of adjustment to work with. If you're stretching things out past 500, EGW offers a 20 MOA version of this same rail, but for the vast majority of Kimber 84 owners the 0 MOA is the one you want.
Fitment Notes for the Kimber 84 / 84M Base
This rail is cut for the Kimber 84 and 84M short action receivers and is not compatible with Kimber 8400 rifles, so double-check which model you're running before ordering. The base sits at roughly 0.35 inches high and works with any standard Picatinny or Weaver scope rings. EGW recommends torquing the mounting screws to around 20 inch-pounds with a drop of blue threadlocker for a setup that won't walk on you.
Key Specifications
- Manufacturer: EGW (Evolution Gun Works)
- MPN: 81010
- UPC: 841370109371
- Fits: Kimber 84 and 84M Short Action
- Elevation / Cant: 0 MOA
- Rail Type: One-Piece Picatinny
- Material: Solid 7075-T6 Aircraft-Grade Aluminum
- Finish: Matte Black Type III Hard-Coat Anodize
- Overall Length: 6.276 in
- Height: Approx. 0.35 in
- Center Spread: 3.352 in
- Cross Slots: Full-length, MIL-STD-1913 spec (+/- .002")
- Ring Compatibility: Picatinny or Weaver
- Handedness: Ambidextrous
- Recommended Torque: 20 in-lbs
- Made In: USA
What’s Included
- EGW HD Kimber 84 / 84M Short Action 0 MOA Picatinny rail (1)
- Mounting Torx screws
- Torx bit / wrench
Frequently Asked Questions
Will this EGW rail fit my Kimber 8400?
No, this base is cut specifically for the Kimber 84 and 84M short action receivers and will not fit the Kimber 8400. If you've got an 8400, you'll want EGW's dedicated 8400 rail instead. It's always worth confirming your exact model before ordering since the two are not interchangeable.
What's the difference between 0 MOA and 20 MOA on this mount?
The 0 MOA version has no built-in elevation cant, which keeps your scope's adjustment range balanced and makes it ideal for shooting inside roughly 500 yards. The 20 MOA option adds forward elevation bias to help you reach out past 500 yards. For most hunting and general use with the Kimber 84, the 0 MOA is the right choice.
What scope rings do I need with this rail?
This is a true Picatinny base, so it works with any standard Picatinny or Weaver scope rings. The full-length cross slots give you plenty of room to position your rings for proper eye relief. Just match your ring height and tube diameter to the scope you're mounting.
Does the Kimber 84 rail come with mounting hardware?
Yes, it ships with the Torx mounting screws and the bit you need to install it. EGW recommends torquing the screws to about 20 inch-pounds and adding a drop of blue threadlocker so the base stays put. You'll just need your scope rings, which are sold separately.



Reviews
There are no reviews yet.