Description
The .450 Marlin is a straight-walled thumper built for lever guns, and if you're feeding one, loading your own gives you control over bullet selection and velocity that factory ammo just can't match. This RCBS 3-Die Roll Crimp Set is the Group C setup made specifically for that cartridge, with three dies that handle every step from resizing to the final crimp. Everything threads into any standard single-stage or progressive press that takes 7/8"-14 dies, which covers the vast majority of presses out there.
What the RCBS .450 Marlin Die Set Does
The set breaks the job into three stages. The hardened steel sizer die resizes the case back to spec and de-primes it in the same stroke, though this is a steel die rather than carbide, so you'll want to lube your cases before running them through. From there the expander die opens the case mouth to the proper diameter and puts a slight flare or bell on it so your bullet seats square without shaving lead or crumpling the brass. The seater die finishes things off by seating the bullet to your chosen depth and applying a roll crimp that locks it in place.
Why the Roll Crimp Matters on a .450 Marlin
Recoil in a tube-fed lever gun can shove bullets deeper into the case or pull them loose under spring tension, and either one spells trouble. The roll crimp seater die rolls the case mouth into the bullet's cannelure to keep everything put, which is exactly what you want in a hard-kicking cartridge like this. Consistent crimp also helps ignition and keeps your velocities from wandering shot to shot.
Built to RCBS Standards
These dies are machined to tight tolerances, hardened, and made in the USA, and they ship in the familiar green storage box to keep them organized and protected on the bench. RCBS backs their gear with a reputation for standing behind it, and this set is the kind of tooling that'll outlast a whole lot of range sessions. Note that a shellholder is not included, so grab the correct one if you don't already have it on hand.
Key Specifications
- Manufacturer: RCBS
- Manufacturer Part Number: 35504
- UPC: 076683355041
- Caliber: .450 Marlin
- Die Set Group: Group C
- Number of Dies: 3
- Die Types: Sizer, Expander, Seater
- Crimp Type: Roll Crimp
- Die Material: Hardened Steel
- Thread Size: 7/8"-14
- Shellholder Included: No
- Case Lube Required: Yes
- Country of Origin: USA
What’s Included
- Sizer die with decapping unit
- Expander die
- Seater die with roll crimp
- Plastic storage box
- Instructions
- Warranty card
Frequently Asked Questions
Does the RCBS .450 Marlin die set include a shellholder?
No, a shellholder is not included with this set. You'll need to pick up the correct RCBS shellholder for the .450 Marlin case head separately if you don't already have one. This is standard for most rifle die sets.
Are these carbide dies or steel?
These are hardened steel dies, not carbide. Because of that, you'll need to lubricate your cases before resizing to keep them from sticking in the die. A light coat of case lube is all it takes.
Will this set work with my press?
Yes, these dies use the industry-standard 7/8"-14 thread, so they fit virtually any single-stage or progressive press designed for standard reloading dies. That covers RCBS presses along with most other major brands.
Why does this .450 Marlin set use a roll crimp?
A roll crimp rolls the case mouth into the bullet's cannelure to hold it firmly in place. That matters in a hard-recoiling tube-fed lever gun, where bullets can shift under recoil or magazine spring pressure. It also helps keep velocities more consistent from shot to shot.



Reviews
There are no reviews yet.