0
0

RCBS Full Length Die Set – .30-338 Win Mag – Group D – 29401

UPC: 076683294012

$95.99

3 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The .30-338 Winchester Magnum is a wildcat through and through, and that's exactly why a quality die set matters here. This RCBS Group D full-length set covers a cartridge that nobody loads at the factory, so if you own a rifle chambered for it, handloading isn't a hobby choice, it's the only way to feed it. The two-die set gives you everything needed to turn brass into finished rounds: a full-length sizing die with an expander-decapping unit and a seater die with a bullet seater plug.

The .30-338 is a classic that comes from necking down .338 Winchester Magnum brass to take .308 diameter bullets, a trick that goes back to Fred Huntington and the RCBS family itself. It earned a reputation at 1000 yards and spent years in service with the Army Marksmanship Unit. Since there's no factory ammo, most folks form cases from .338 Win Mag brass or neck up 7mm Rem Mag. This set uses the standard 7/8-14 thread, so it drops right into nearly any single stage or progressive press you've got on the bench.

What the .30-338 Win Mag Die Set Actually Does

The full-length sizer brings cases down to SAAMI minimum dimensions, sizes the outside of the case, knocks out the old primer, and expands the neck to grip a new bullet. Vents are built in to keep trapped air and excess lube from denting a shoulder, and the headspace is held to tight tolerances so you're not stretching case bodies every time you run the handle. The seater die includes a built-in roll crimper that locks the bullet in place as it seats, which is a nice touch for a hard-recoiling magnum.

Built to Last on the RCBS Bench

These dies are machined from RCBS proprietary die steel to exacting tolerances and finished by hand. For a cartridge that's heavy on reformed brass and tailored loads, having dies that stay consistent across hundreds of cases is what keeps your groups tight. Pair it with an RCBS #4 shell holder and some .338 Win Mag brass and you're ready to start building rounds the way the old benchrest crowd did.

Key Specifications

  • Manufacturer: RCBS
  • Caliber: .30-338 Winchester Magnum
  • Die Group: Group D – Bottleneck Rifle Cartridges
  • Set Type: Full-Length 2-Die Set
  • Model / MPN: 29401
  • UPC: 076683294012
  • Thread: Standard 7/8-14
  • Material: Proprietary Die Steel
  • Compatible Shell Holder: RCBS #4
  • Overall Length: 5.95 in
  • Weight: 1.29 lbs
  • Country of Origin: Made in USA

What’s Included

  • Full-Length Sizing Die with Expander-Decapping Unit
  • Bullet Seating Die with built-in roll crimper
  • Green RCBS die box

Frequently Asked Questions

Is there factory ammo for the .30-338 Win Mag, or do I have to reload?

The .30-338 is a wildcat, so there's no mainstream factory ammunition for it. Reloading is the way to feed a rifle chambered in this caliber, which is exactly what this die set is for. Most loaders form brass from .338 Winchester Magnum cases or neck up 7mm Remington Magnum brass.

What shell holder do I need with this .30-338 Win Mag die set?

The .30-338 uses the RCBS #4 shell holder, the same one that fits .338 Win Mag, .300 Win Mag, and 7mm Rem Mag. Shell holders are sold separately and are not included with the die set. Since you'll likely be forming brass from one of those parent cases anyway, the #4 covers you across the board.

Will this RCBS die set work in a non-RCBS press?

Yes. These dies use the industry-standard 7/8-14 thread, which fits nearly every single stage and progressive press on the market, including Hornady, Lee, Lyman, and others. You don't need an RCBS press to run them.

Does the seater die crimp the bullet?

It does. The seater die has a built-in roll crimper that secures the bullet at the same time it's seated, which is handy for a hard-kicking magnum where you want to keep bullets from walking under recoil. If you prefer to seat and crimp separately, you can back the crimp out and just seat.

Additional information

UPC

076683294012

Manufacturer

Manufacturer Part Number

29401

Shipping Weight

1.2938

Reviews

There are no reviews yet.

Be the first to review “RCBS Full Length Die Set – .30-338 Win Mag – Group D – 29401”