0
0

RCBS Taper Crimp Seater Die – .40 S&W / 10mm Auto – 22162

UPC: 076683221629

$38.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you're loading for a .40 S&W or 10mm Auto semi-auto, the crimp style matters more than a lot of folks realize. These cartridges headspace on the case mouth, which means a roll crimp is the wrong tool for the job. This RCBS Taper Crimp Seater Die handles both the seating and the taper crimp in a single operation, gently squeezing the case mouth around the bullet instead of rolling it over. That keeps your rounds chambering right and feeding clean through the magazine.

What the RCBS Taper Crimp Seater Die Does on the Press

The die seats your bullet to depth and applies the taper crimp at the same time. The crimp feature is machined right into the die body, so you adjust the amount of crimp by moving the die up or down in the press. A light touch is all it takes here. The goal is to remove the case-mouth flare and snug the brass back onto the bullet, not to crush it. Most loaders find that just enough to close the bell is exactly where a .40 or 10mm wants to be.

Why Reloaders Reach for a Taper Crimp on .40 and 10mm

A proper taper crimp does two things for a semi-auto round. It helps prevent bullet setback during feeding and under recoil, and it keeps the case mouth square so the cartridge headspaces correctly in the chamber. Bullets that creep forward or cases with leftover flare are a recipe for feeding trouble, and this die solves both at once. It's a favorite step for anyone running volume through a .40 or feeding a hard-recoiling 10mm.

Built to the RCBS Standard

Like the rest of the RCBS die lineup, this one is machined to tight tolerances, hardened, and hand finished. It uses the standard 7/8"-14 thread, so it drops into any single-stage, turret, or progressive press that takes common dies. RCBS has been making reloading gear for over 60 years, and the brand's reputation for tools that last is well earned.

Key Specifications

  • Manufacturer: RCBS
  • Manufacturer Part Number: 22162
  • UPC: 076683221629
  • Die Group: Group B – Popular Pistol Cartridges
  • Caliber: .40 S&W / 10mm Auto
  • Die Type: Taper Crimp Seater Die
  • Crimp Style: Taper crimp
  • Function: Seats bullet and taper crimps in one operation
  • Thread Size: 7/8"-14
  • Material: Machined, hardened steel
  • Quantity: 1 die (seater only)
  • Shipping Weight: 1.3063 lbs

What’s Included

  • RCBS Taper Crimp Seater Die (.40 S&W / 10mm Auto)
  • Instruction sheet
  • RCBS Lifetime Limited Warranty

Frequently Asked Questions

Does the RCBS Taper Crimp Seater Die seat and crimp at the same time?

Yes. This die seats the bullet to your chosen depth and applies the taper crimp in the same stroke. The crimp feature is machined into the die body, and you adjust the amount of crimp by raising or lowering the die in the press.

Why use a taper crimp instead of a roll crimp for .40 S&W and 10mm Auto?

Both of those cartridges headspace on the case mouth, so a roll crimp would interfere with proper chambering and can cause feeding problems. A taper crimp gently squeezes the case mouth around the bullet, closing the flare while keeping the mouth square. That's the correct crimp for straight-wall semi-auto rounds.

Is this die the complete set or just the seating die?

This is the taper crimp seater die only, not a full die set. You'll still need a sizing die and an expander/flare die to complete the loading process for .40 S&W or 10mm Auto. Plenty of reloaders add this die to an existing setup when they want a dedicated taper crimp seater.

Will this RCBS die fit my press?

It uses the standard 7/8"-14 thread, so it works with any single-stage, turret, or progressive press that accepts common dies. That covers the vast majority of presses out there, including other RCBS, Lee, Hornady, and Dillon setups.

Additional information

UPC

076683221629

Manufacturer

Manufacturer Part Number

22162

Shipping Weight

1.3063

Reviews

There are no reviews yet.

Be the first to review “RCBS Taper Crimp Seater Die – .40 S&W / 10mm Auto – 22162”