Description
Neck sizing is one of those techniques that separates casual reloaders from the folks chasing every last bit of accuracy out of a single rifle, and the RCBS Neck Sizer Die in .25-06 Remington is built exactly for that job. Rather than working the whole case, this die touches only the neck, leaving the shoulder and body in the fire-formed shape your chamber already gave them. That means your brass goes right back into the same rifle with a snug, custom fit.
This is a single die, not a two-die set, so plan on using it alongside a seater you already own. It comes with an expander-decapping unit, which means it knocks out the spent primer and sets the right amount of neck tension to hold your .25-06 bullets firmly in one pass. The die uses the standard 7/8-14 thread, so it threads into any common single-stage or progressive press without any fuss.
What the RCBS .25-06 Neck Sizer Die Does Differently
Because only the neck gets worked, the brass sees far less stretching and thinning than it would with full-length sizing. That translates to extended case life and reduced chances of case head separation down the road. For a round like the .25-06, which a lot of folks run through a single favorite bolt gun for deer and varmints alike, that consistency pays off on paper and in the field.
Build Quality You'd Expect From RCBS
The die body is machined from case-hardened steel and hand-inspected before it leaves the factory, and RCBS backs it with their reputation for dies that last decades. One thing worth noting: the shell holder is sold separately, so grab the correct one for the .25-06 case head if you don't already have it in your kit. Toss this die in your press, and you've got a straightforward path to tighter groups from brass that's already been through your chamber.
Key Specifications
- Manufacturer: RCBS
- Caliber: .25-06 Remington
- Die Type: Neck Sizer Die (single die)
- Die Group: Group A – Popular Rifle Cartridges
- Material: Case-Hardened Steel
- Thread: Standard 7/8-14
- Carbide: No
- Manufacturer Part Number (MPN): 12030
- UPC: 076683120304
- Shipping Weight: 0.775 lbs
What’s Included
- RCBS Neck Sizer Die (.25-06 Rem)
- Expander-Decapping Unit
- Plastic storage box
Frequently Asked Questions
Is the RCBS .25-06 Neck Sizer Die a full set or just one die?
This is a single neck sizer die, not a two-die set. It handles neck sizing, decapping, and neck expansion in one pass. You'll need your own seater die to finish loading your .25-06 rounds.
Does this die come with a shell holder?
No, the shell holder is sold separately. You'll want the correct RCBS shell holder for the .25-06 Remington case head if you don't already have one in your kit. It threads into any press using the standard 7/8-14 thread.
Why would I neck size instead of full-length size my .25-06 brass?
Neck sizing works only the case neck and leaves the fire-formed shoulder and body alone, which gives a tighter fit in the rifle those cases were fired in. This reduces brass stretching, extends case life, and can tighten up your groups. It's best suited for bolt-action rifles where you're loading brass to go back into the same gun.
Does the RCBS Neck Sizer Die remove the spent primer?
Yes. The included expander-decapping unit knocks out the spent primer while sizing the neck in the same stroke. It also sets proper neck tension so the bullet seats with a firm hold.



Reviews
There are no reviews yet.