Description
When you're chambering a new 6mm Remington barrel or sizing up a used rifle before you trust it, guessing isn't good enough. This Forster GO gauge gives you a hard, verified reference point for the shortest end of the chamber spec. Drop it in, close the bolt, and you know right away whether the chamber will accept SAAMI-max factory ammunition. The gauge also works for the older .244 Remington, since it shares the same case dimensions as the 6mm Rem.
Forster has been making measuring tools in Lanark, Illinois since 1935, and this one carries that reputation. It's machined from A2 tool steel and held to tolerances within roughly .00015 of an inch, which is the kind of precision that lets you check a freshly reamed chamber with real confidence. At 1.777 inches, it represents the minimum chamber dimension for the cartridge.
Where the 6mm Remington GO Gauge Earns Its Keep
The GO gauge is the starting point for any barrel fitting job. If the bolt closes on it cleanly, the chamber is long enough to accept ammo built to maximum factory specs. If the bolt won't close or drags, the barrel may be threaded in a touch too far and the headspace is running tight. That single check saves a lot of headaches down the road, and it's why gunsmiths and armorers keep a GO gauge on the bench for every caliber they touch.
Pairing the GO Gauge With Your Other Tools
Most folks running a full chamber check use the GO alongside a NO-GO and sometimes a FIELD gauge to bracket the whole safe range. The GO tells you the minimum is right, the others tell you when things have stretched too far. For a home reloader or someone building on a new barrel, having an accurate reference in hand beats trusting a feeler or a fired case. It's a simple, rugged piece that'll outlast the rifle you bought it for, and it stores away in its own tube between jobs.
Key Specifications
- Manufacturer: Forster Products
- Manufacturer Part Number: HG0244G
- UPC: 757253004360
- Caliber: 6mm Remington / .244 Remington
- Gauge Type: GO Length, Rimless
- Material: A2 Tool Steel, Hardened
- Length: 1.777"
- Tolerance: Within .00015"
- Standard: SAAMI Dimensioned
- Country of Origin: United States
- Color: Steel
- Quantity: 1
What’s Included
- One Forster 6mm Remington GO headspace gauge
- Protective storage tube
Frequently Asked Questions
What does the 6mm Remington GO gauge actually tell me?
The GO gauge represents the minimum chamber dimension for the cartridge. If your bolt closes on it cleanly, the chamber is long enough to accept factory ammunition built to maximum SAAMI specs. If the bolt won't close or closes with resistance, your headspace is running tight and the barrel may be threaded in too far.
Will this gauge work for a .244 Remington rifle too?
Yes. The 6mm Remington and .244 Remington share the same case and chamber dimensions, so this single gauge covers both. That's why you'll often see it listed for both calibers.
Do I need a NO-GO or FIELD gauge along with the GO gauge?
For fitting and checking a new barrel, the GO gauge confirms the short end of the spec. Many people pair it with a NO-GO gauge to bracket the acceptable range, and a FIELD gauge to check the far end on an older or used rifle. The three together give you the full picture, but the GO is the essential starting point for any chambering job.
What is this Forster headspace gauge made of?
It's machined from A2 tool steel and hardened, then precision ground to tolerances within about .00015 of an inch. That build quality is what makes it a dependable reference you can trust on a freshly reamed chamber, and it'll hold up for decades of bench use.




Reviews
There are no reviews yet.