0
0

Redding NxGen Titanium Carbide Sizer Die 9mm Luger (87172)

UPC: 611760871726

$102.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Redding NxGen Carbide Sizer Die in 9mm Luger (MPN 87172) is the kind of tool you buy once and run for years. Instead of the sharp, irregular grain structure found in common tungsten carbide, Redding uses titanium carbide, which has an incredibly smooth, rounded microstructure when you look at it under a microscope. That slick surface is what lets you resize your brass without case lube, keeps galling to a minimum, and gives you that fluid, no-binding feel every time you drop the handle.

What the NxGen 9mm Luger Sizer Brings to the Bench

This is the newest generation of Redding's carbide handgun dies, and the internal redesign is where it earns its keep. The NxGen geometry is built to maximize how closely your sized cases match chamber dimensions, which translates to better feeding, longer case life, and tighter, more consistent groups downrange. Titanium carbide also happens to be the hardest readily available carbide, so the sizing ring holds up to high-volume pistol loading without wearing out.

Fitting the Redding 87172 Into Your Setup

The die is machined from quality alloy steel and hand polished, then threaded in the standard 7/8-14 pattern so it drops into single-stage presses and progressives alike. It includes a decapping assembly, so it sizes the case and knocks out the spent primer in a single stroke. For reference, 9mm Luger runs the #13 shellholder on a standard press. It's a 9mm Luger sizer specifically, so plan on pairing it with your expander and seating dies if you're building a full loading bench.

Why 9mm Reloaders Reach for the Titanium Carbide Die

High-volume 9mm shooters tend to be hard on their gear, and skipping the lube step saves real time when you're cranking out hundreds of rounds. Folks who have run titanium carbide against standard tungsten carbide dies consistently note the smoother feel and cleaner sizing. If you load a lot of 9mm and want a die that keeps pace, this one earns its spot in the toolhead.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number (MPN): 87172
  • UPC: 611760871726
  • Caliber: 9mm Luger
  • Die Type: NxGen Titanium Carbide Sizing Die
  • Carbide Material: Titanium Carbide
  • Thread: 7/8-14
  • Shellholder: #13
  • Decapping: Includes decapping assembly
  • Lube Required: No, lubeless sizing
  • Country of Origin: Made in USA

What’s Included

  • Redding NxGen 9mm Luger titanium carbide sizing die (1)
  • Decapping assembly
  • Plastic storage case

Frequently Asked Questions

Do I need case lube with the Redding carbide sizer die for 9mm?

No. The titanium carbide sizing ring gives you a slick, non-galling surface that resizes brass without any lube. That saves you the lube-and-clean steps and keeps your loading sessions moving, which is a real time saver when you're running big batches of 9mm.

What's the difference between titanium carbide and regular tungsten carbide dies?

Under a microscope, tungsten carbide shows sharp, irregular grains, while titanium carbide looks smooth and rounded. That difference in microstructure gives the Redding die a slipperier surface and a smoother feel as cases pass through. Titanium carbide is also the hardest readily available carbide, so the ring holds its edge over a lot of reloading.

Does the 87172 sizer die deprime the case too?

Yes. This die includes a decapping assembly, so a single stroke resizes the case back to spec and punches out the spent primer at the same time. It's a true full-length sizing and depriming die for 9mm Luger.

Is this a complete die set or just the sizing die?

This is the sizing die only (MPN 87172), not a full set. You'll want to pair it with an expander and a bullet seating die to load complete rounds. Redding also offers it as part of their NxGen carbide set and Pro Series sets if you'd rather buy everything together.

Additional information

UPC

611760871726

Manufacturer

Manufacturer Part Number

87172

Reviews

There are no reviews yet.

Be the first to review “Redding NxGen Titanium Carbide Sizer Die 9mm Luger (87172)”