0
0

Forster 300 WSM Bushing Bump Neck Sizing Die (BBD3701)

UPC: 757253998881

$72.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Reloaders chasing tighter groups out of their 300 WSM know that neck tension is one of the biggest variables you can control at the bench. Forster's Bushing Bump Neck Sizing Die hands you that control. Instead of sizing the neck down with a fixed dimension, you pick the bushing that matches your brass and your desired tension, then the die sizes the neck and bumps the shoulder back in one pass. The body of the case keeps its fire-formed fit to your chamber, which is exactly what you want for precision work.

What the 300 WSM Bushing Bump Die Does Differently

This die sizes the neck and shoulder to set headspace and deprimes the case in a single stroke. Because the neck is only worked as little as necessary while the shoulder gets bumped back for correct cartridge headspace, your brass sees far less stress than it would in a standard full length die. That means straighter necks, better concentricity, and brass that lasts noticeably longer through firing cycles. It's a favorite approach for handloaders who are after consistency round to round.

Interchangeable Bushings for Custom Neck Tension

The heart of the system is the bushing. Forster offers over 90 bushing sizes in .001 inch increments, so you can tune outside neck diameter to your exact brass and the grip you want on the bullet. The bushings are machined to a smooth interior finish for clean, consistent sizing. One nice bonus: pull the bushing out entirely and the die will bump just the shoulder without touching the neck diameter, which is handy for fire-formed brass that already has the neck where you want it.

Built the Way Forster Builds Everything

This is a made in the USA Bushing Bump Neck Sizing Die machined to the tight tolerances Forster is known for. Keep in mind the bushings are sold separately so you can match them precisely to your load, and this standalone die does not include an expander ball. If you run a Forster Co-Ax press you won't need a shellholder; in other presses, use the shellholder your press manufacturer recommends.

Key Specifications

  • Manufacturer: Forster Products
  • Manufacturer Part Number: BBD3701
  • UPC: 757253998881
  • Caliber: 300 WSM (Winchester Short Magnum)
  • Die Type: Bushing Bump Neck Sizing Die
  • Function: Sizes neck and shoulder, sets headspace, deprimes
  • Bushing Increments: 0.001 inch
  • Available Bushing Sizes: Over 90 options (sold separately)
  • Number of Dies: 1
  • Country of Origin: United States

What’s Included

  • One Forster 300 WSM Bushing Bump Neck Sizing Die
  • Decapping assembly
  • Instructions

Frequently Asked Questions

Does the 300 WSM Bushing Bump Neck Sizing Die come with bushings?

No, this is the standalone die (BBD3701) and bushings are sold separately. That lets you choose the exact bushing diameter that matches your brass and desired neck tension. Forster offers more than 90 bushing sizes in .001 inch increments. If you'd rather have a starting set, Forster also sells a kit version that includes three pre-selected bushings.

What does the bushing bump die do that a standard full length die doesn't?

It sizes the neck only as much as necessary using the bushing you select, while bumping the shoulder back to set correct headspace. The case body keeps its fire-formed fit to your chamber instead of being resized down. The result is less overworked brass, better neck concentricity, and longer case life, which is why precision reloaders like it.

Can I use this die to bump just the shoulder without sizing the neck?

Yes. Remove the bushing entirely and the die will bump the case shoulder back without changing the neck diameter at all. That's useful for fire-formed brass where the neck tension is already dialed in and you only need to correct headspace for smooth chambering.

Do I need a shellholder to run this Forster die?

If you're using a Forster Co-Ax press, you don't need a shellholder since those presses don't require one. In any other brand of press, use the shellholder recommended by your press manufacturer. The die uses standard 7/8-14 threads so it fits common single stage presses.

Additional information

UPC

757253998881

Manufacturer

Manufacturer Part Number

BBD3701

Reviews

There are no reviews yet.

Be the first to review “Forster 300 WSM Bushing Bump Neck Sizing Die (BBD3701)”