0
0

Diamondback 6.5 Creedmoor 20″ Fluted 416 Stainless AR-10 Barrel 1:8

UPC: 815875019121

$171.99

15 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you are putting together a large-frame AR in 6.5 Creedmoor, the barrel is the one part you cannot cheap out on, and this is where Diamondback did things right. This 20 inch barrel is machined from 416 stainless steel, the same free-machining stainless that match barrel makers have trusted for decades because it cuts clean, holds tight bore tolerances, and resists throat erosion better than standard chrome moly. Diamondback button rifles it with a 5-groove bore and finishes the muzzle with an 11 degree target crown, the detail that protects the last bit of rifling your bullet touches and keeps groups honest.

The 1:8 twist is well matched to the 6.5 Creedmoor, stabilizing everything from lighter varmint loads up through the 140 and 147 grain match bullets the cartridge is famous for. A rifle-length gas system takes full advantage of the 20 inch tube, giving you a longer, gentler gas pulse that translates to a softer-shooting rifle and less wear on your bolt carrier group. That matters when you are watching trace through a scope and want to spot your own impacts.

The medium contour strikes a sensible middle ground between a pencil barrel and a full bull profile, and the fluting cuts ounces while adding surface area to shed heat during longer strings. The bead blasted finish knocks down glare and gives it a clean, uniform matte look under a free-float handguard. Muzzle threads are the standard 5/8×24, so your brake, comp, or suppressor mount goes right on.

This barrel is built on the DPMS-pattern high-profile spec used by Diamondback's own DB10 rifles, so it suits most LR-308 style builds. Note that it will not work with DPMS Gen2 receivers. Whether you are replacing a shot-out tube or starting a precision gas gun from scratch, this is a lot of barrel for the money, made by a company that builds complete rifles around this exact part every day.

Key Specifications

  • Caliber: 6.5 Creedmoor
  • Barrel Length: 20"
  • Gas System: Rifle-Length
  • Material: 416 Stainless Steel
  • Twist Rate: 1:8
  • Muzzle Thread: 5/8×24
  • Rifling: Button Rifled, 5-Groove
  • Crown: 11 Degree Target Crown
  • Profile: Medium Contour, Fluted
  • Finish: Bead Blasted

Frequently Asked Questions

Will this barrel work on my LR-308 or AR-10 style upper?

Yes, this barrel uses the DPMS high-profile pattern that Diamondback builds its own DB10 rifles around, which is the most common large-frame AR spec on the market. It will drop into most LR-308 pattern uppers. The one notable exception is DPMS Gen2 receivers, which use a different barrel extension and are not compatible with this barrel.

Why choose a rifle-length gas system instead of mid-length on a 20 inch barrel?

A rifle-length system places the gas port farther down the bore, which lowers port pressure and stretches out the gas impulse. The result is a smoother recoil cycle, less violence on the bolt carrier group, and longer parts life. On a 20 inch 6.5 Creedmoor meant for precision work, that softer impulse also makes it easier to stay in the scope and spot your hits.

Does fluting actually help, or is it just for looks?

It does both jobs. Fluting removes material from the outside of the barrel, cutting noticeable weight from a medium contour while keeping most of its stiffness, since rigidity comes mainly from the outer diameter. The flutes also increase surface area, which helps the barrel shed heat a bit faster during longer range sessions.

What bullet weights will the 1:8 twist stabilize in 6.5 Creedmoor?

The 1:8 twist handles essentially the full range of 6.5mm bullets, from 95 grain varmint loads up through the 140 to 147 grain high-BC match bullets that made the Creedmoor famous. That makes this barrel a solid pick whether you shoot factory match ammo, hunt with 129 to 143 grain loads, or handload heavies for long range steel.

What else do I need to install this barrel?

This is a barrel only, so plan on a low-profile gas block sized to the journal, a rifle-length gas tube, and a muzzle device for the 5/8×24 threads. You will also want a barrel nut wrench, torque wrench, and an upper receiver vise block for proper installation. If you are not comfortable headspacing and torquing a barrel, any competent gunsmith can install it quickly.

Additional information

UPC

815875019121

Manufacturer

Manufacturer Part Number

DB6.5CR20M416SS8F-R

Length

20"

Model

Reviews

There are no reviews yet.

Be the first to review “Diamondback 6.5 Creedmoor 20″ Fluted 416 Stainless AR-10 Barrel 1:8”