Description
Talley's 760420 is a one-piece scope mount and ring combo built specifically for the Henry H015 Single Shot rifle. Instead of a separate base and rings bolted together, Talley machines the whole thing as a single unit, so the only joint you deal with is where the mount meets the receiver. That takes a lot of the fiddling out of mounting a scope and gives your 30mm optic a stable, repeatable home right out of the box.
Why the Talley 760420 One-Piece Design Works
The appeal of a unitized mount like this is simple: fewer parts means fewer things to come loose or shift under recoil. By eliminating the connection point between the base and the lower ring, Talley removes the chance of an out-of-alignment interface that you sometimes fight with two-piece setups. The result is a rigid platform that holds zero and keeps your crosshairs honest shot after shot.
Machined From Aircraft-Grade Aluminum
Talley extrudes high-grade aluminum and then CNC machines each mount to tight tolerances before finishing it in a black anodized coating. That approach gives you a mount that is noticeably lighter than comparable steel rings and bases without giving up strength or durability. It is a nice match for a trim single-shot rifle like the H015, where you do not want to bolt a heavy chunk of hardware onto a light gun.
Fit and Setup for the Henry H015
This combo carries a 0.760 inch mount height and is cut to fit the Henry H015 Single Shot receiver directly. The 30mm rings are sized for the many popular scopes that use a 30mm main tube. Because the rings and base come matched and aligned from the factory, no lapping is required, and mounting is a straightforward job with the included hardware. Talley has been building these mounts for decades, and the 760420 reflects the same precise fit and American craftsmanship the brand is known for.
Key Specifications
- Manufacturer: Talley
- Manufacturer Part Number: 760420
- UPC: 876430007274
- Model: Scope Mount/Ring Combo
- Fits: Henry H015 Single Shot
- Tube Diameter: 30mm
- Mount Height: 0.760"
- Mount Type: To Receiver
- Style: Integrated Scope Ring and Base
- Construction: One-Piece CNC-Machined Aluminum
- Finish: Black Anodized
- Lapping Required: No
What’s Included
- Talley 760420 one-piece scope mount with integrated 30mm rings
- Mounting hardware and screws
Frequently Asked Questions
What rifle does the Talley 760420 fit?
The 760420 is machined to mount directly to the Henry H015 Single Shot receiver. It is model-specific, so it is built to drop onto that platform rather than serve as a universal mount. If you are running a different rifle, you will want the Talley mount cut for that specific model.
What size scope will fit the Talley 760420 rings?
These rings are sized for scopes with a 30mm main tube, which covers a large chunk of modern optics. Just make sure your scope's tube diameter is 30mm and not 1 inch or 34mm before ordering. The mount height is 0.760 inches, which works well for many standard objective sizes on a single-shot rifle.
Do I need to lap the Talley 760420 rings?
No. Talley machines the base and rings as a single unit to tight tolerances, so the rings come aligned from the factory and no lapping is required. You can mount your scope right out of the box with the included hardware.
What makes a one-piece Talley mount better than a two-piece setup?
The one-piece construction removes the joint between the base and the lower ring, which is a common spot for alignment issues or loosening under recoil. That gives you a more rigid platform that holds zero and keeps your scope properly aligned. It also comes in lighter than comparable steel rings and bases.




Reviews
There are no reviews yet.