0
0

L.E. Wilson 243 Ackley Improved Micrometer Top Bullet Seater Die

UPC: 815145027474

$135.52

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you chase single-digit groups and sweat every thousandth of seating depth, the L.E. Wilson 243 Ackley Improved Micrometer Top Bullet Seater Die belongs on your bench. This is a chamber-type inline seater machined from solid stainless bar stock, cut for the 243 Winchester Ackley Improved 40-degree cartridge. Instead of threading into a standard press, the case and bullet drop into a chamber that mirrors your rifle, and the seater stem pushes straight down. Everything stays aligned through the whole stroke, which is exactly why these dies have a reputation as the concentricity king among benchrest and F-Class crowds.

How the 243 AI Wilson Micrometer Seater Earns Its Keep

The micrometer top is the star here. Seating depth adjusts in .001 inch graduations with an easy-to-read dial, so you can walk bullets in or out without pulling calipers every few rounds. Bigger jumps are handled by the 3/8-24 threads in the cap. Reloaders doing seating depth testing love this setup because you can set the mic to your lands-touch reference and go up or down from there with repeatable clicks. Once you find the node, lock it down and it stays put.

Running the 243 Ackley Improved Seater Die at the Bench or the Range

These are hand dies, built to run with a small arbor press rather than a conventional threaded press. You can even tap a bullet home with a soft mallet in a pinch, though an arbor press is the proper way to go. The big advantage is feel. With an arbor press you sense each bullet seating into the neck, which lets you catch the oddball round with inconsistent neck tension before it ever makes it downrange. It is also compact enough to bring to a match and run seating depth work right on the firing line.

Built From Stainless for the Long Haul

The body is machined from 416 and 303 stainless steel, so this die will outlast plenty of rifles. The markings are laser engraved, there is essentially one moving part during seating, and the fit of stem to body is tight enough to pull a slight vacuum. It is a simple, rugged tool that does one job extremely well.

Key Specifications

  • Manufacturer: L.E. Wilson
  • Manufacturer Part Number: S24-ACK
  • UPC: 815145027474
  • Cartridge: 243 Winchester Ackley Improved (40 Degree)
  • Die Type: Chamber-Type Inline Bullet Seater
  • Adjustment: Micrometer top, .001 inch graduations
  • Major Adjustment: 3/8-24 TPI threaded cap
  • Material: 416 and 303 Stainless Steel
  • Press Compatibility: Arbor press or soft mallet (not for conventional presses)
  • Seater Stem: Standard seater drift included
  • Marking: Laser engraved
  • Country of Origin: United States

What’s Included

  • One L.E. Wilson Micrometer Top Bullet Seater Die
  • Standard seater stem/drift
  • Seater base to elevate the primer above the arbor press plate
  • Instructions

Frequently Asked Questions

Does the 243 Ackley Improved Wilson seater die work with a regular reloading press?

No, this is a chamber-type hand die designed to run with an arbor press. You can seat bullets with a soft-faced mallet in a pinch, but it is not made to thread into a conventional reloading press. Most precision reloaders pair it with a small arbor press for the best feel and consistency.

What does the micrometer top actually do on this seater die?

The micrometer top lets you adjust seating depth in .001 inch increments with repeatable clicks, so you can fine-tune where the bullet sits relative to the lands. Larger adjustments are made with the 3/8-24 threads in the cap. It is especially handy for seating depth testing and dialing loads in right at the range.

Will this die fit a standard 243 Winchester?

No, this die is chambered specifically for the 243 Winchester Ackley Improved 40-degree cartridge. The Ackley case has a sharper shoulder and different body dimensions than the standard 243 Win, so you want a die cut to match your chamber. If you are shooting standard 243 Winchester, you will need the 243 Win version instead.

Why do precision reloaders like the Wilson inline seater for accuracy?

The chamber-type design holds both the case and the bullet in near-perfect alignment while the stem pushes straight down, which produces loaded rounds with very low runout. There is essentially one moving part during seating, so there is little slop to introduce misalignment. Running it on an arbor press also lets you feel each bullet seat, which helps you catch rounds with inconsistent neck tension.

Additional information

UPC

815145027474

Manufacturer

Manufacturer Part Number

S24-ACK

Reviews

There are no reviews yet.

Be the first to review “L.E. Wilson 243 Ackley Improved Micrometer Top Bullet Seater Die”