Description
Anyone running a progressive press knows the drill. Cases move fast, your hands are busy, and peeking into every piece of brass to confirm the powder charge just isn't realistic once you get into a rhythm. The Hornady Powder Cop Die solves that with a dead-simple mechanical check that rides along with your loading cycle and gives you a visual read on every charge.
Here's how it works. You install the die in an open station right after your powder drop. Inside the body is a stem that rides on top of the powder column in the case. When the charge is correct and the die is set up for your load, a white o-ring sits flush with the top of the die. No powder in the case and the stem won't rise, which flags an empty or squib. An overcharge pushes the o-ring up well above the die surface. Once your eyes learn where that ring should sit, a double charge or a missed drop jumps out immediately.
Why the Powder Cop Earns Its Station
This is the kind of insurance that pays for itself the first time it catches a problem. Hornady runs a similar setup on their own factory ammo presses, so the concept is proven at volume. It won't replace paying attention at the bench, but it adds a second set of eyes that never gets tired or distracted. For folks loading pistol rounds where a double charge can fit in the case without overflowing, that extra check is worth a lot.
Fit and Setup on the Hornady Powder Cop Die
The body uses the standard 7/8-14 thread, so it drops into Hornady Lock-N-Load presses and most other progressives using that thread. It works with all powder types and cartridges, and setup is caliber-specific but quick once you dial it in for a given load. A lock ring is included so you can keep your setting repeatable. Reloaders consistently call it easy to set up and a must-have for bottleneck and pistol loads alike. One tip from the field: keep the stem and housing clean so the o-ring reads smooth and doesn't drag.
Key Specifications
- Manufacturer: Hornady
- Model: Powder Cop
- Manufacturer Part Number: 050063
- UPC: 090255500639
- Product Type: Powder Checker / Charge Monitor
- Thread Size: 7/8-14
- Compatibility: Progressive presses, including Hornady Lock-N-Load
- Powder Compatibility: All powder types and cartridges
- Material: Steel
- Finish: Matte silver
- Indicator: Visual white o-ring
- Weight: 6 oz
What’s Included
- Hornady Powder Cop Die
- Lock ring
Frequently Asked Questions
How does the Hornady Powder Cop Die actually tell me the charge is right?
An internal stem rides on top of the powder in each case and moves a white o-ring at the top of the die. When the die is set for your load and the charge is correct, the o-ring sits flush with the die surface. An empty case keeps the stem down, and an overcharge pushes the o-ring up well above the die, so problems are easy to spot at a glance.
Will the Powder Cop Die fit my press?
It uses the standard 7/8-14 thread, so it fits Hornady Lock-N-Load presses and most other progressive presses that use that thread size. You'll want an open station after your powder drop to mount it. It works with all powder types and cartridges once you set it for your specific load.
Does the Powder Cop Die replace checking my powder charges by hand?
No, and Hornady is upfront about that. It's meant to add a reliable second check rather than replace careful attention at the bench. Think of it as a constant visual backup that flags squibs, missed drops, and double charges while you keep your loading rhythm going.
Is the Hornady Powder Cop Die hard to set up?
Setup is quick and caliber-specific. You install the die after your powder drop, cycle a correctly charged case, and adjust until the o-ring reads flush. Reloaders consistently find it simple to dial in, and keeping the stem and housing clean keeps the readout smooth.



Reviews
There are no reviews yet.