0
0

Springfield Armory M1A Magazine Catch – OEM Steel MA0604

UPC: 706397852832

$20.99

3 in stock

Online inventory may differ from in-store availability.

NOTICE: This item is subject to shipping times of 10-12 days due to brand shipping logistics.

Fast Order Processing

Orders are processed quickly so your item gets moving as soon as possible.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The magazine catch is one of those small parts that does a big job on your M1A. It's what holds the mag firmly in place while you shoot and lets it drop free when you thumb the release. This is the genuine Springfield Armory piece, part number MA0604, machined from steel with a matte blued finish that matches the rest of your rifle's hardware.

Built to Fit the M1A and M14 Platform

This catch is made for Springfield M1A series rifles chambered in .308 Winchester, 7.62x51mm, and 6.5 Creedmoor. That covers a wide swath of the lineup, from the Standard Issue and Loaded models to the SOCOM 16 and Scout Squad variants. Because it's the same OEM spec Springfield puts in from the factory, you're getting the exact dimensions and geometry the platform was designed around, no guesswork about aftermarket tolerances.

When a Fresh M1A Magazine Catch Earns Its Keep

Mag catches take a beating over time. Every rock-and-lock of a steel M14 mag rides against that catch, and after enough cycles the engagement surface can wear down or the part can get damaged during a detail strip. Having a factory replacement ready means you're not sidelined waiting on parts when it's time to freshen up an older rifle. It's also a solid addition to a spare parts kit if you run your M1A hard or shoot it often.

Installation ties into the trigger group and magazine catch spring, so it's a job best handled by someone comfortable working on the M14 action or a qualified gunsmith. Once it's seated and tensioned properly, the mag should snap in and lock up with that satisfying, positive feel you expect from a rifle in this class.

Key Specifications

  • Manufacturer: Springfield Armory
  • Model: M1A / M14
  • Manufacturer Part Number: MA0604
  • UPC: 706397852832
  • Material: Steel
  • Finish: Matte Blued
  • Compatible Calibers: .308 Win, 7.62x51mm, 6.5 Creedmoor
  • Type: OEM Replacement Magazine Catch
  • Fitment: M1A series including Standard, Loaded, SOCOM 16, Scout Squad
  • Origin: Made in USA

What’s Included

  • One Springfield Armory M1A magazine catch (MA0604)

Frequently Asked Questions

Will this magazine catch fit my SOCOM 16 or Scout Squad M1A?

Yes. This is the factory OEM catch designed for the Springfield M1A series across the lineup, including the SOCOM 16, Scout Squad, Standard, and Loaded models. As long as your rifle is a genuine M1A or M14-pattern build in .308, 7.62x51mm, or 6.5 Creedmoor, this is the correct part.

Is the M1A magazine catch hard to install?

It's not a huge job, but it does involve the trigger group and works together with the magazine catch spring and pin. Anyone familiar with detail stripping an M14 action can handle it, and Springfield recommends a qualified gunsmith if you're not comfortable working inside the trigger housing. Take your time getting the tension set right so mags lock up cleanly.

Does this come with the magazine catch spring and pin?

No, this listing is just the magazine catch itself (part number MA0604). The spring and catch pin are separate components with their own part numbers, so if you're rebuilding the whole assembly you may want to grab those alongside it.

Why would I replace the magazine catch on my M1A?

The most common reasons are wear from years of rocking mags in and out, damage during a detail strip, or a lost part during cleaning. Swapping in a fresh OEM catch restores that positive lockup and clean mag release. It's also just a good part to keep in a spare kit if you shoot your rifle a lot.

Additional information

UPC

706397852832

Manufacturer

Manufacturer Part Number

MA0604

Model

Reviews

There are no reviews yet.

Be the first to review “Springfield Armory M1A Magazine Catch – OEM Steel MA0604”