0
0

Redding 6mm Creedmoor Competition Bushing Neck Die Set 58443

UPC: 611760584435

$368.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Redding 6mm Creedmoor Competition Bushing Neck Die Set (part number 58443) is built for the reloader who sorts brass, chases single-digit runout, and wants every round coming off the press as uniform as the last. This is a three-die set that bundles a Competition Bushing Neck Sizing Die, a Body Die, and a Competition Seating Die. It's the same style of tooling that came straight out of Redding's benchrest and 1000-yard competition background, so it's aimed at folks who take load development seriously.

What the Three Dies in the 58443 Set Actually Do

The neck sizer uses interchangeable bushings in .001-inch increments, so you dial in exactly the neck tension you want rather than working a case harder than it needs. The case is fully supported in a tight sliding sleeve while the bushing self-centers on the neck, which is a big part of why these dies keep runout so low. The Body Die comes along so you can full-length size the body and bump the shoulder back when cases start getting sticky to chamber after several firings, all without touching the neck. The Competition Seating Die rounds it out with a precision-ground sleeve that aligns both the case and the bullet before seating ever starts.

Micrometer Control on the Redding Competition 6mm Creedmoor Dies

Both the neck sizer and the seating die carry micrometer adjustments graduated in .001-inch clicks, with the seater adding a zero-set feature so you can lock in a favorite seating depth and return to it later. The seating stem is ground to match bullet diameter so closely that Redding likes to demonstrate it floating on a column of air. For partial neck sizing, a popular trick among benchrest crowds, the micrometer lets you fine-tune exactly how much of the neck gets touched.

One thing worth knowing up front: this set is designed for brass that's been sorted for neck wall thickness or neck turned, so it ships without a size button. Bushings and a shellholder are sold separately. The standard shellholder for 6mm Creedmoor is Redding #1, and the neck bushings run a .266 to .274 range for this cartridge. Measure your loaded neck diameter and subtract about .001 to land on the right bushing.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number: 58443
  • UPC: 611760584435
  • Cartridge: 6mm Creedmoor
  • Bullet Diameter: 0.243 in
  • Die Type: Competition Bushing Neck Sizing, Body, Competition Seating
  • Number of Dies: 3
  • Thread Size: 7/8"-14
  • Adjustment: Micrometer, .001" increments
  • Bushing Range: .266 to .274 (sold separately)
  • Standard Shellholder: #1 (sold separately)
  • Country of Origin: USA

What’s Included

  • Competition Bushing Neck Sizing Die
  • Body Die
  • Competition Seating Die

Frequently Asked Questions

Does the 58443 Competition die set come with bushings and a shellholder?

No, both bushings and the shellholder are sold separately. For 6mm Creedmoor you'll want the Redding #1 standard shellholder, and neck bushings for this cartridge fall in the .266 to .274 range. A quick way to pick a bushing is to measure your loaded round's neck diameter and subtract about .001 inch.

Why doesn't this Redding 6mm Creedmoor set include a size button?

The Competition Bushing Neck Die Set is built for reloaders who sort their brass for neck wall thickness or neck turn their cases, so a size button isn't needed. The bushing handles neck tension directly and self-centers on the neck for better concentricity. If you're running commercial brass as-is without sorting, a Type S bushing set with a size button may suit you better.

What is the Body Die in this set for?

The Body Die full-length sizes the case body and bumps the shoulder back without touching the neck. It's meant for cases that have become tough to chamber after repeated firing and neck sizing. Think of it as your reset tool for when brass starts fighting you on bolt close.

Does the Competition Seating Die crimp the bullet?

No, the Competition Seating Die does not crimp. It's a precision micrometer seater with a floating sleeve that aligns the case and bullet before seating begins, calibrated in .001-inch increments with a zero-set feature. If you need a crimp, you'd add a separate crimp die.

Additional information

UPC

611760584435

Manufacturer

Manufacturer Part Number

58443

Reviews

There are no reviews yet.

Be the first to review “Redding 6mm Creedmoor Competition Bushing Neck Die Set 58443”