Description
If you've ever chased tighter groups and started wondering about neck tension, this is the die that opens that door. The Redding Type S Bushing Neck Die for 6mm Creedmoor gives you precise control over case neck size and the grip your necks hold on the bullet, which is exactly what precision reloaders want when they're squeezing every bit of consistency out of a load.
The heart of this die is the interchangeable bushing system. Instead of being stuck with one fixed neck diameter, you swap bushings that come in .001-inch increments, so you can tune the sizing to your specific brass and the neck tension you're after. The resizing bushing self-centers on the case neck, which helps keep runout down and concentricity up. That matters because neck wall thickness varies brand to brand, and if you run different brass you'll likely want a few bushing sizes on hand to cover your bases.
Why the 6mm Creedmoor Type S Neck Die Earns Its Keep
The adjustable decapping rod lets you position the bushing to size only part of the neck length if you want, leaving a section unsized for alignment. It ships with a standard size button, which is handy for folks running commercial brass as-is, and a decapping pin retainer comes along too. That retainer means you can neck size without the size button at all, a nice option for anyone who sorts or turns case necks for uniformity. Pull the bushing entirely and the die works as a dedicated decapping die.
Bushings and Brass Notes for the Type S Neck Die
One thing to know going in: bushings are sold separately. A common way to find your size is to measure the neck wall thickness on a few loaded rounds, double that figure, add bullet diameter, then pick a bushing a thousandth or two under that number depending on the tension you want. Redding has built a long-standing reputation among benchrest and long-range crowd for clean internal finish and consistent sizing, and this neck die is cut from that same cloth. It's Made in the USA.
Key Specifications
- Manufacturer: Redding
- Cartridge: 6mm Creedmoor
- Die Style: Bushing Neck Sizing Die
- Bushing Increments: .001 inch
- Bullet Diameter: 0.243 inch
- Standard Shellholder: #1
- Thread: 7/8-14
- Quantity: 1 die
- Country of Origin: Made in USA
- Manufacturer Part Number: 71443
- UPC: 611760714436
What’s Included
- Type S Bushing Neck Sizing Die
- Adjustable decapping rod with standard size button
- Decapping pin retainer
- Instruction sheet
Frequently Asked Questions
Does the Type S Bushing Neck Die come with bushings?
No, the bushings are sold separately. This lets you pick the exact sizes that match your brass and your preferred neck tension. Most reloaders keep a few on hand, since neck wall thickness changes from one brass brand to the next.
How do I pick the right bushing size for 6mm Creedmoor?
A common method is to measure the neck wall thickness on several loaded rounds and average it, double that number, then add the bullet diameter of .243 inch. From there you choose a bushing a thousandth or two under that loaded neck measurement depending on how much tension you want. Running .001 under is typical for single-feeding a bolt gun, while .002 is common when feeding from the magazine.
Can I size only part of the case neck with this die?
Yes. The adjustable decapping rod lets you position the bushing so it sizes just a portion of the neck length, leaving a section unsized to help the case align in the chamber. This is one of the features precision reloaders like about the Type S design.
What shellholder do I need for the 6mm Creedmoor Type S Neck Die?
The 6mm Creedmoor uses a Redding #1 standard shellholder, which is sold separately. The die itself uses the common 7/8-14 thread, so it fits standard single-stage and turret presses.





Reviews
There are no reviews yet.