Description
When it comes to keeping a rimfire barrel spotless without babying the crown, the Bore Tech Bore Stix .22 Cal Rimfire 44" is about as good as coated rods get. This is a true one-piece rod with a high-strength steel core wrapped in a low-friction polymer coating, so it stays rigid with minimal bow and flex while gliding through the bore. The 44-inch working length is sized for longer barrels and bench setups, and remember that's the usable length from the handle forward, so plan on roughly another 5.5 inches for the overall rod once you add the handle.
Why the Rimfire Bore Stix Runs Slimmer
This is the rimfire-specific version, and that matters. The rod runs about .015" smaller in diameter than the centerfire model, which lets it clear the ejectors and choked barrels you'll run into on a lot of .22 LR rifles. You can run this rimfire rod on a .22 centerfire barrel just fine, but you don't want to go the other way around. The orange color-coded handle makes it easy to grab the right rod when you've got a few hanging in the rack.
The Handle and Tip That Set the Bore Stix Apart
The free-floating, dual ball bearing handle is the headline feature. It lets the rod follow the rifling on its own, so you get a smooth pass without the jag or brush unscrewing halfway down the bore. Up front, the replaceable Proof-Positive tip is non-brass, which means it won't throw a false copper reading when you're running copper-removing solvents. That female 8-32 tip also swaps between jags and brushes without needing extra adapters, and there's an index dot at the base of the handle for checking your barrel's twist rate.
Keeping Your Bore Stix in Shape
Maintenance is easy. After a cleaning session, just wipe the rod down with a damp rag or paper towel and it's ready for the next go. Pair it with quality jags, brushes, and a bore guide and this rod will earn its keep for years. Proudly made in the USA.
Key Specifications
- Manufacturer: Bore Tech
- Model: Proof-Positive Bore Stix
- Manufacturer Part Number: BSTX-2244-RF
- UPC: 667739902441
- Caliber: .22 Caliber Rimfire
- Working Length: 44 inches
- Overall Length: Add approx. 5.5 inches for handle
- Rod Diameter: .195 inches
- Rod Material: Coated high-strength spring steel core
- Coating: Low-friction polymer
- Tip Type: Replaceable non-brass Proof-Positive female tip
- Tip Thread: 8-32 female
- Handle: Free-floating dual ball bearing, non-slip rubber grip
- Handle Color: Orange (.22 Rimfire identification)
- Construction: One-piece
- Country of Origin: USA
What’s Included
- Bore Tech Bore Stix .22 Cal Rimfire 44" one-piece cleaning rod with dual ball bearing handle and Proof-Positive tip
Frequently Asked Questions
Can I use this .22 rimfire Bore Stix rod on a .22 centerfire rifle?
Yes, you can run the rimfire rod on a .22 centerfire barrel without any problems. The rimfire version is about .015" smaller in diameter, so it works in both. Just don't go the other direction, as a centerfire rod is too large to safely clear the ejectors found in rimfire actions.
Does the 44" measurement include the handle?
No, the 44 inches is the working length of the rod, measured from the front of the handle to the tip. For the true overall length, add roughly 5.5 inches for the handle. This 44" size is geared toward longer barrels and bench cleaning setups.
Why does the Bore Stix use a non-brass tip?
The replaceable Proof-Positive tip is non-brass so it won't give you a false copper reading when you use copper-removing solvents, which is a common headache with traditional brass-tipped rods. The female 8-32 tip also lets you swap between jags and brushes without extra adapters. That design helps protect the crown when you pull the rod back through the bore.
How do I clean the rod after using it?
It's simple. When you're done, just wipe the rod down with a damp rag or paper towel and it's good to go. The durable low-friction coating handles solvents well and won't peel or soften with normal use.



Reviews
There are no reviews yet.