Description
This is Redding's most versatile .243 Winchester die setup, built for handloaders who want to dial in every stage of case prep instead of settling for "good enough." The Type S-Elite packages three dies together: a Type S bushing full length sizing die, a Type S bushing neck sizing die, and Redding's Competition Seating Die. That combination lets you choose between full-length resizing or neck sizing only depending on how your brass and chamber get along, all without buying separate sets down the road.
What the Type S Bushing Dies Bring to the Bench
Both sizing dies run on interchangeable neck bushings available in .001 inch increments, so you set exactly the neck tension you want rather than taking whatever a standard die gives you. The bushings are free-floating, meaning they self-center on the case neck for straighter, more consistent sizing and better brass life. Pull the bushing out and the full length die works as a body die while the neck die works as a decapping die, which is a nice bit of flexibility when you're fine-tuning a load. Redding bushings come in hardened steel or with a Titanium Nitride coating for added lubricity.
Why the Competition Seating Die Matters
The Competition Seating Die is the star of the show for a lot of precision loaders. It uses a sliding sleeve that fully supports and aligns the case before the bullet ever meets the seating stem, which keeps runout low and seating depth repeatable. The micrometer top adjusts in .001 inch clicks, so finding and returning to your ideal bullet jump is quick and dead simple. It ships with a standard seating stem that handles most bullet shapes, and VLD stems are offered separately if you're loading long, pointy match projectiles.
Fit and Build on the 243 Winchester Elite Set
Like all Redding dies, these use the industry-standard 7/8-14 threads, so they drop right into any common single-stage or turret press. The machining and heat-treating Redding is known for means these should serve a long time on the bench. Keep in mind that neck sizing bushings and a shellholder are sold separately, so grab the bushing size that matches your brass and bullet combo when you order.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 60114
- UPC: 611760601149
- Cartridge: .243 Winchester
- Set Type: Type S-Elite Bushing 3-Die Set
- Number of Dies: 3
- Dies Included: Type S Bushing Full Length Sizing, Type S Bushing Neck Sizing, Competition Seating
- Thread Size: 7/8-14
- Bushing Adjustment: .001 inch increments
- Seating Adjustment: Micrometer, .001 inch increments
- Bushings Included: No, sold separately
- Shellholder Included: No, sold separately
What’s Included
- Type S Bushing Full Length Sizing Die
- Type S Bushing Neck Sizing Die
- Competition Bullet Seating Die with standard seating stem
- Spare decapping pin
- Hex/Allen wrenches
- Button replacer for use with the expander button removed
- Die box that doubles as a loading block
- Instruction literature
Frequently Asked Questions
Does the 243 Winchester Type S-Elite die set come with bushings?
No, the neck sizing bushings are sold separately so you can choose the exact size for your brass and neck tension. Redding offers them in .001 inch increments in both hardened steel and Titanium Nitride coated versions. You'll want to measure a loaded round's neck diameter and subtract a few thousandths to pick the right bushing.
What is the difference between the full length die and the neck die in this set?
The Type S full length bushing die resizes the entire case body and bumps the shoulder while controlling neck tension with the bushing, which is the go-to for brass headed to a semi-auto or any chamber where reliable feeding matters. The Type S neck bushing die only sizes the neck, leaving the fire-formed body alone to preserve case life and fit. Having both lets you switch strategies without buying another set.
Will these dies fit my press?
Yes, the Redding Type S-Elite dies use the standard 7/8-14 thread found on virtually all single-stage and turret presses. They thread right in like any other common rifle die. Just remember a shellholder is not included, so pick one up if you don't already have the correct size for .243 Winchester.
Can I use the Competition Seating Die for any bullet?
It ships with a standard seating stem that works well with most common bullet profiles. If you're loading long VLD or boat-tail match bullets, Redding sells a dedicated VLD stem separately for a better nose fit. Note that the Competition Seating Die is not intended for heavily compressed powder charges.



Reviews
There are no reviews yet.