Description
If you shoot a wheelgun chambered in .38 Special or .357 Magnum, this Redding Series A set covers the full reloading cycle for both cartridges in one box. Because these are straight-wall cases, you can't size and expand the neck in a single pass, so Redding includes three separate dies to handle each step properly. The result is reloaded ammo that drops into a standard SAAMI chamber and feeds clean.
What's Inside the Redding 80184 Die Set
The set includes a full length sizing die with a decapping rod assembly, an expander die fitted with a neck expanding plug, and a bullet seating die that has a bullet guide, a built-in crimp ring, and the proper seating plug. The expander step flares the case mouth just enough to seat cast or jacketed bullets without shaving lead or crumpling brass. Keep in mind these are steel dies, so a light case lube is needed during the sizing stage.
Why the Redding Series A Dies Hold Up
Redding dies are made from quality alloy steel and machined on Hardinge super-precision lathes, which is a big reason they hold such tight tolerances. They're heat treated in atmospherically controlled furnaces, hand polished, and ultrasonically cleaned before they ship. The Series A line is simply Redding's standard-production set, built to the same quality as the rest of the catalog at a more approachable price. All the bodies use the industry-standard 7/8-14 thread, so they'll thread right into a single stage press or a progressive like a Dillon 550.
Loading .38 Special and .357 Mag From One Set
Since .357 Magnum is just a lengthened .38 Special, this set handles both from the same dies, which makes it a smart pick if you shoot and reload for revolvers chambered either way. The included die box doubles as a loading block and has a spot for your shellholder plus a spare decapping pin and hex wrench. The shellholder itself is sold separately, so grab the right one for your press if you don't already have it.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 80184
- Model: Series A 3-Die Set
- UPC: 611760801846
- Cartridge: .38 Special / .357 Magnum
- Die Type: Full Length Sizing, Expanding, Bullet Seating
- Number of Dies: 3
- Material: Case-hardened alloy steel
- Thread: 7/8-14 (industry standard)
- Firearm Type: Revolver / handgun
- Case Type: Straight-wall
- Country of Origin: United States
- Shipping Weight: 1.2813 lbs
What’s Included
- Full length resizing die with decapping rod assembly
- Expander die with neck expanding plug
- Bullet seating die with bullet guide, built-in crimp ring, and seating plug
- Spare decapping pin
- Hex wrench
- Plastic die storage box / loading block
Frequently Asked Questions
Does the Redding 80184 die set load both .38 Special and .357 Magnum?
Yes. Since .357 Magnum is essentially a longer version of the .38 Special case, this single set handles both cartridges with the same three dies. That makes it a practical choice for anyone running a revolver chambered in either round.
Is a shellholder included with this Redding die set?
No, the shellholder is sold separately. The die box has a dedicated spot to store it, but you'll need to pick up the correct shellholder for your press and the .38/.357 case head. If you already reload other cartridges you may have the right one on hand.
Do these steel dies require case lube?
Yes. These are steel dies, so a light coat of case lubrication is needed during the full length sizing step to keep cases moving smoothly and prevent sticking. A quick wipe-down or tumble after sizing cleans the lube off before seating bullets.
Will the Redding Series A dies fit my progressive press?
They use the industry-standard 7/8-14 thread, so they thread into single stage presses and common progressives alike. Reloaders have reported them fitting setups like the Dillon 550 without issue. Just confirm your press uses standard 7/8-14 die stations.





Reviews
There are no reviews yet.