0
0

Lee Precision 8x57mm Mauser Collet Neck Sizing Die (91022)

UPC: 734307910228

$22.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you're loading for a bolt-action 8mm Mauser and chasing tighter groups, Lee's Collet Neck Sizing Die takes a different route than standard dies. Instead of dragging an expander ball through the case mouth, a steel collet with fingers squeezes the neck against a precision mandrel. That approach sizes the neck evenly from top to bottom, keeps the neck-to-shoulder junction crisp, and typically produces brass with runout measured under a thousandth of an inch. Less runout means your bullets sit straight in the case, which is where real accuracy gains start.

What Makes the 8×57 Collet Die Different

Because this die only works the neck and leaves the body alone, your cases stay fire-formed to your rifle's chamber. That fit is a big part of why neck sizing can stretch brass life so much further than full-length resizing. There's no expander ball stretching the brass back and forth, so you get consistent neck tension case to case, which translates to more uniform ignition and steadier velocities downrange. Reloaders who run this type of die often mention how little case wear they see over many firings.

Running the 8x57mm Mauser Collet Necksizing Die

One of the nicest parts of a collet setup is that it needs no case lubrication, so there's no greasy cleanup afterward, just a quick wipe and a brush of the primer pocket. It uses the standard 7/8"-14 thread and fits any common single-stage or turret press. A good tip from experienced hands: once you reach the top of the press stroke, back the case down about an inch, rotate it an eighth of a turn, and size again for even more consistent necks. There is a slight learning curve since it operates unlike other dies, so always keep a case in place when cycling it.

Who This 8×57 Collet Neck Sizing Die Suits Best

This die is built for bolt-action rifles and shines when you're reloading brass that was fired in your own gun. It is not the right tool for autoloaders, slide actions, or lever guns, since those need the full-length sizing that this die intentionally skips. For the bolt-gun crowd loading the classic 8mm Mauser, it's a straightforward path to straighter ammo and longer-lasting brass.

Key Specifications

  • Manufacturer: Lee Precision
  • Manufacturer Part Number: 91022
  • UPC: 734307910228
  • Cartridge: 8x57mm Mauser (8mm Mauser)
  • Die Style: Collet Neck Sizing Die
  • Gun Type: Rifle
  • Thread: 7/8"-14
  • Lubrication: None required
  • Country of Origin: United States

What’s Included

  • Lee Precision 8x57mm Mauser Collet Neck Sizing Die (die only)

Frequently Asked Questions

Do I need case lube with the 8×57 collet neck sizing die?

No, you don't. The collet squeezes the neck against a mandrel rather than dragging it through a sizing ring, so no lubrication is needed. That also means no sticky cleanup afterward, just a quick wipe and a brush of the primer pocket.

Can I use this die for a semi-auto or lever-action 8mm Mauser?

This collet die is intended for bolt-action rifles only. Because it sizes just the neck and leaves the case body fire-formed to your chamber, it is not recommended for autoloaders, slide actions, or lever guns, which need full-length resizing for reliable feeding. Stick to brass that was fired in your own bolt gun.

Does the 8x57mm Mauser collet die come with a seating die or anything else?

No, this is the collet neck sizing die by itself. If you want a seating die included, Lee offers it as part of their 8x57mm collet two-die set instead. This listing is the single die only.

Will neck sizing eventually require full-length sizing?

Yes, after a number of firings you may find the bolt getting a bit snug to close, which is the sign it's time to full-length resize. Neck sizing with a collet die extends brass life and improves concentricity in between, but it's smart to keep a full-length die on hand for when cases need it.

Additional information

UPC

734307910228

Manufacturer

Manufacturer Part Number

91022

Reviews

There are no reviews yet.

Be the first to review “Lee Precision 8x57mm Mauser Collet Neck Sizing Die (91022)”