Description
If you're loading precision 6mm Creedmoor and want your brass to stay fit to your chamber, the Lee Precision Collet Neck Sizing Die is one of the simplest ways to tighten up your groups. Instead of working the whole case, it uses a steel collet to squeeze the neck down against a hardened mandrel, giving you a straight, concentric neck with very little bullet runout. The mandrel sets your inside neck diameter, so bullet seating comes out consistent round after round.
How the 6mm Creedmoor Collet Die Works
The collet design is a bit different from a standard neck sizer. As the press comes up, the collet fingers close around the neck and press the brass firmly against the mandrel. Because nothing drags across lubed case walls, you skip the case lube step entirely and keep your brass clean. It takes a little feel to dial in the neck tension, and the beauty of it is you can make tiny adjustments to the ram pressure to get exactly the hold you want on the bullet.
Longer Brass Life With the Collet Neck Sizer
Since this die only touches the neck and leaves the body and shoulder fire-formed to your chamber, your cases don't get overworked. That means far less stretch, fewer trimming sessions, and brass that holds up through many more loadings than full-length resizing. Reloaders running this die regularly report their cases lasting dramatically longer, which adds up fast when you're shooting a precision cartridge like the 6mm Creedmoor.
A couple of things worth knowing: this die is meant for brass that's been fired in your own rifle, and it's built for bolt guns rather than autoloaders, slide, or lever actions where you need full-length sizing for reliable feeding. It uses the standard 7/8"-14 thread, so it drops right into any common single-stage or turret press. If you want to upgrade your decapping, Lee also offers an undersize decap mandrel separately for even tighter neck tension control.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 91005
- UPC: 734307910051
- Cartridge: 6mm Creedmoor
- Die Style: Collet Neck Sizing Die
- Die Type: Die Only (single die)
- Thread: 7/8"-14
- Case Lube Required: No
- Collet Material: Steel
- Recommended For: Bolt-action rifles, cases fired in your own firearm
- Country of Origin: United States
What’s Included
- 6mm Creedmoor Collet Neck Sizing Die
- Storage box
Frequently Asked Questions
Does the 6mm Creedmoor collet die need case lube?
No, it doesn't. The collet squeezes the neck against the mandrel without dragging across the case body, so there's no lube step and no cleanup afterward. That keeps your brass clean and saves you time at the bench.
Is this a die set or just the collet die?
This is the collet neck sizing die only, not a full set. It covers the neck sizing side of things, so you'll still want a seating die to finish your loads. If you prefer a complete package, Lee also sells a collet die set.
Will the Lee collet die work for my gas gun or lever action?
Neck sizing is best suited to bolt-action rifles. Autoloaders, slide actions, and lever guns generally need full-length resizing to feed reliably, so a collet neck sizer isn't the right fit for those. It also works best on brass that's been fired in your own chamber.
How does the collet die help with accuracy and brass life?
By squeezing the neck against a precision mandrel, it produces a straight, concentric neck with minimal bullet runout, which helps consistency downrange. Since it only sizes the neck and leaves the body fire-formed to your chamber, your brass isn't overworked and tends to last many more loadings than full-length sizing.



Reviews
There are no reviews yet.