0
0

Forster 280 Ackley Improved Bench Rest Seater Die (6172)

UPC: 757253991042

$70.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Forster built its name on this die, and it is still one of the benchmarks for straight-line bullet seating. The 280 Ackley Improved Bench Rest Seater Die uses a sliding die chamber that holds the case, bullet, and seating stem all in alignment at the same time, instead of leaning on just the bullet and case neck the way a conventional seater does. That full support is what gives you the low runout and consistency handloaders chase when they want their 280 AI to shoot to its potential.

How the Forster Bench Rest Seater Earns Its Reputation

The heart of the die is a close-fitting chamber machined with a one-piece reamer, with a concentric bullet channel just slightly larger than bullet diameter. As you run the press, the case slides up into that chamber and gets captured before the hand-polished seating stem ever touches the bullet. The result is coaxial seating that starts the bullet straight every time, which is exactly where accuracy begins. The seating stems have been refined over the years to play nicely with modern ballistic tip and VLD-style bullets, so it is not fussy about what you are loading.

Built From Quality Steel With the Cross Bolt Lock Ring

This die is machined from quality steel to tight tolerances and hand polished before and after heat treating for a clean, smooth finish. It is a non-crimping design, so it focuses purely on accurate, repeatable seating depth. Every Forster die ships with the Cross Bolt Die Lock Ring, which clamps around the entire body and connects the two ends of the ring rather than driving a screw straight into the die threads. That means no canting, no thread damage, and a setting that holds when you lock it down with a 7/64 hex key.

Fits 280 Ackley Improved and Standard Presses

Cut specifically for the 280 Ackley Improved, this seater threads into any standard 7/8-14 press. If you run it in a Forster Co-Ax, no shellholder is needed since the press uses jaws instead. In any other press, just use the shellholder recommended for your press. It is the kind of tool you set once and trust for years at the bench.

Key Specifications

  • Manufacturer: Forster Products
  • Cartridge: 280 Ackley Improved
  • Die Style: Bench Rest Bullet Seating Die
  • Seating Type: Straight-line (co-axial), non-crimping
  • Thread: 7/8-14
  • Lock Ring: Cross Bolt Die Lock Ring included
  • Construction: Hand-polished, heat-treated quality steel
  • Manufacturer Part Number: 6172
  • UPC: 757253991042

What’s Included

  • One Forster Bench Rest Seater Die (280 Ackley Improved)
  • Hand-polished bullet seating stem
  • Cross Bolt Die Lock Ring
  • Instructions
  • Die box

Frequently Asked Questions

Does the 280 Ackley Improved Bench Rest Seater Die crimp the case?

No, this is a non-crimping seater die. It is built purely for accurate, repeatable bullet seating depth and straight-line alignment. If you want a crimp, you would add a separate crimp die to your process.

Will this Forster seater die work in my press?

Yes, it uses a standard 7/8-14 thread and adapts to most reloading presses. If you run a Forster Co-Ax press, you do not need a shellholder because it uses jaws. In any other press, just use the shellholder recommended for that press.

Does the Bench Rest Seater Die come with a lock ring?

It does. Every Forster die includes the Cross Bolt Die Lock Ring, which clamps around the full body of the die instead of biting into the threads with a set screw. You tighten or loosen it with a 7/64 hex key, and it holds your setting without canting or damaging the die threads.

Is this the micrometer version of the Forster seater?

No, this is the standard Bench Rest Seater Die with a threaded, hand-polished seating stem. If you want micrometer adjustment that dials seating depth in fine increments, Forster offers a separate Ultra Micrometer Seater Die for the 280 Ackley Improved. This standard version still delivers the same close-fitting chamber and straight-line seating.

Additional information

UPC

757253991042

Manufacturer

Manufacturer Part Number

6172

Reviews

There are no reviews yet.

Be the first to review “Forster 280 Ackley Improved Bench Rest Seater Die (6172)”