0
0

Forster 375 EnABELR XL Ultra Micrometer Seater Die

UPC: 757253990090

$233.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Loading for the 375 EnABELR means you're chasing serious long range performance, and your bullet seating needs to match. This is Forster's XL Ultra Micrometer Seater Die cut for that cartridge, a 1-1/4" die built specifically for the Co-Ax XL press and the oversized case family it was designed around. It takes all the straight-line seating that made Forster's Bench Rest dies a staple on precision benches and adds a micrometer head on top so you can nail your seating depth without the usual guesswork.

What the 375 EnABELR Ultra Seater Brings to the Bench

The heart of this die is the sliding chamber that supports both the case and the bullet in near-perfect alignment while the bullet is press-fit into place. That co-axial design is what keeps runout low and rounds concentric, pull after pull. The micrometer head lets you adjust seating depth in .001" clicks, and you can split that further to around .0005" when you're fine tuning toward the lands. Each full turn of the head moves the stem .025", so once you find a load your rifle likes, you jot down the number and dial right back to it next session.

Build Quality on the 375 EnABELR Seater Die

Forster machines these from quality steel to tight tolerances, then hand polishes the dies before and after heat treating for a smooth finish. The Cross Bolt Die Lock Ring clamps the split ring from the sides rather than driving a set screw straight into the die threads, so your setting stays put and the threads stay clean. This is a non-crimping seater, which is exactly what you want when you're after consistency on heavy, long-range projectiles.

Fitting the 375 EnABELR XL Die to Your Press

Keep in mind this is an XL die with a 1-1/4" body, not a standard 7/8" die. It's made for the Forster Co-Ax XL, the larger press designed with extreme long range cartridges like the CheyTac family and 50 BMG in mind. If you're running that press and loading the 375 EnABELR, this is the seater built for the job.

Key Specifications

  • Manufacturer: Forster Products
  • Manufacturer Part Number: 007500
  • UPC: 757253990090
  • Cartridge: 375 EnABELR
  • Die Style: Bullet Seating Die (Ultra Micrometer)
  • Die Size: XL, 1-1/4" body
  • Press Compatibility: Forster Co-Ax XL
  • Material: Steel
  • Micrometer Adjustment: .001" increments, down to about .0005"
  • Travel Per Full Revolution: .025"
  • Seating Type: Non-crimping, straight-line
  • Lock Ring: Forster Cross Bolt Die Lock Ring
  • Quantity: 1 die

What’s Included

  • Forster 375 EnABELR XL Ultra Micrometer Seater Die
  • Forster Cross Bolt Die Lock Ring
  • Instruction sheet

Frequently Asked Questions

Will this 375 EnABELR seater die fit my standard reloading press?

No. This is an XL die with a 1-1/4" body, which is larger than the common 7/8"-14 standard. It's built for the Forster Co-Ax XL press, the oversized press designed to handle big cartridges like the 375 EnABELR.

How fine can I adjust seating depth with the Ultra Micrometer head?

The micrometer head moves in .001" increments and can be split down to roughly .0005" for fine tuning toward the lands. Each full revolution of the head equals .025" of travel. Once you find your ideal depth, record the setting and dial right back to it on future loads.

Does this die crimp the case?

No, it's a non-crimping straight-line seater. The sliding chamber holds the case and bullet in alignment while the bullet is press-fit to depth, which is what keeps runout low and your rounds concentric. If you want a crimp, you'd handle that as a separate step.

Is this a complete die set or just the seater?

This is the seater die only, sold as a single die. If you also need to size brass for the 375 EnABELR, you'll want a matching full length sizing die to go with it.

Additional information

UPC

757253990090

Manufacturer

Manufacturer Part Number

007500

Reviews

There are no reviews yet.

Be the first to review “Forster 375 EnABELR XL Ultra Micrometer Seater Die”