Description
The Lee Precision 300 PRC Factory Crimp Die is one of those simple tools that quietly makes your reloads better. Instead of the roll crimp built into a seating die, this one uses a collet that squeezes the last bit of the case mouth inward onto the bullet. That means you get a firm, repeatable crimp without the risk of buckling the shoulder or pushing it back, which is a real headache on a long, powerful cartridge like the 300 PRC. Even bullets without a crimp groove get held tight, since the collet is strong enough to form its own.
Why the 300 PRC Factory Crimp Die Earns a Spot on the Bench
A firm crimp does more than just hold the bullet. It raises the pressure needed before the bullet starts to move, which helps even out your pressure curve and tightens up velocity spread across a string. For a cartridge built around long-range accuracy, that consistency is exactly what you're chasing. Plenty of reloaders notice smaller extreme spreads and better groups after adding this step, and the die does it all as a separate operation that won't interfere with your seating depth.
Setup and Use of the Lee 300 PRC Crimp Die
The die uses the standard 7/8-14 thread, so it drops right into a single-stage or turret press. Setup is straightforward: run the die down to touch the shell holder with a loaded round raised, then back off and dial in the crimp with the adjuster on top. One of the nicer perks is that trim length isn't critical with this design, so you don't have to fuss over getting every case to the exact same length before crimping. It's a collet-style die, not the carbide version, and it's made of steel.
What You're Getting
This is sold as the individual 300 PRC Factory Crimp Die, so it's a great add-on if you already own a sizing and seating setup and just want to round out your process. It ships packaged in its own storage container and includes Lee's instructions. A shell holder is not included, so grab the right one if you don't already have it.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 91494
- UPC: 734307914943
- Cartridge: 300 PRC
- Die Style: Factory Crimp Die (Collet Style)
- Crimp Type: Rifle Collet Crimp
- Thread Size: 7/8-14
- Material: Steel
- Carbide: No
- Shell Holder Included: No
- Country of Origin: USA
What’s Included
- 300 PRC Factory Crimp Die
- Plastic storage container
- Instructions
Frequently Asked Questions
How does the Lee 300 PRC Factory Crimp Die work?
It uses a collet that closes inward on the case mouth to press it into the bullet, forming a firm crimp. Because the pressure is inward rather than downward, it won't buckle the case or push the shoulder back the way a roll crimp sometimes can. The crimp is applied as its own separate step after seating, so it doesn't affect your seating depth.
Do my bullets need a crimp groove or cannelure to use this die?
No. The collet in the 300 PRC Factory Crimp Die is strong enough to form its own crimp even on bullets with no groove. That makes it handy for the match and hunting projectiles common in 300 PRC loads.
Is this the carbide version of the Factory Crimp Die?
No, this is the standard collet-style rifle Factory Crimp Die and is not carbide. The collet squeezes the case mouth inward for the crimp rather than relying on a carbide post-sizing ring. It's the design most reloaders prefer for bottleneck rifle cartridges like the 300 PRC.
Does the 300 PRC Factory Crimp Die come with a shell holder?
No, a shell holder is not included with this die. You'll need the correct shell holder for the 300 PRC if you don't already have one. The die uses the standard 7/8-14 thread and fits common single-stage and turret presses.



Reviews
There are no reviews yet.