Description
Anyone who has run a Steyr AUG for any length of time knows the factory magazine release can be a fussy little thing. You smack the button, then still have to tug the mag free. Heresy Design set out to fix exactly that with this Extended Magazine Release, built specifically for the AUG A3 M1 standard stock. The oversized lever gives you a much larger contact surface, so you can drop a mag and swap in a fresh one without breaking your grip or fumbling around.
What Sets the Heresy Design AUG Mag Release Apart
The big win here is leverage and reach. Because the AUG is a bullpup, ergonomics around the mag well matter a lot, and a tiny stock lever works against you when you need speed. This extended release lets you essentially rock the magazine out with minimal effort, closer to how an AK feeds than a fiddly bullpup button. It is machined from 6061 aluminum and given a Mil-Spec Type II anodized finish, so it holds up far better over time than the plastic part it replaces.
Installing the AUG A3 M1 Extended Release
Installation is refreshingly simple and does not require a gunsmith. The release ships with an enclosed slave pin that keeps the internal spring captured, which is the part that usually turns a five minute job into an hour of chasing tiny springs across the bench. Most owners have this swapped in well under a minute once the slave pin lines up with the hole in the stock. A dab of threadlocker on the screw and you are set, just don't crank it down so hard that the lever binds.
One thing to keep straight: this is made for the A3 M1 standard stock only and does not fit the NATO pattern stock. It measures 1.86 inches long and weighs right around 1.5 ounces, so it adds no meaningful bulk to the rifle. Heresy Design backs it with a limited lifetime warranty, which tells you where they stand on the machining and finish. For a small part, this is one of the most noticeable upgrades you can make to how an AUG handles during reloads.
Key Specifications
- Manufacturer: Heresy Design Inc.
- Manufacturer Part Number: HD-MR
- Model: AUG A3 M1
- UPC: 850055721005
- Compatibility: Steyr AUG A3 M1 Standard Stock (not NATO stock)
- Material: 6061 Aluminum
- Finish: Mil-Spec Type II Anodized, Black
- Length: 1.86 in
- Weight: 1.5 oz
- Warranty: Limited Lifetime
- Country of Origin: USA
What’s Included
- Heresy Design Extended Magazine Release lever
- Enclosed slave pin for installation
Frequently Asked Questions
Does this extended magazine release fit any Steyr AUG?
No, this one is made specifically for the AUG A3 M1 standard stock. It is not compatible with the NATO pattern stock. If you are running a NATO stock AUG, you will want Heresy Design's Enhanced Magazine Latch instead, which is a different part.
How hard is the AUG extended magazine release to install?
It is a quick job that most owners knock out in under a minute. The release comes with an enclosed slave pin that keeps the spring captured, which is the tricky part on the factory setup. Line up the slave pin with the hole in the stock, drive the screw through, add a touch of threadlocker, and you are done. Just avoid over-tightening or the lever can bind.
What does this actually improve over the factory release?
The stock AUG release is small and often makes you tug the magazine free after pressing it. This extended lever gives you a much larger surface to hit and better leverage, so the mag drops or rocks out with far less effort. It also swaps a plastic factory part for machined aluminum, so it wears better over time.
Is the Heresy Design mag release made of metal?
Yes, it is machined from 6061 aluminum and finished with a Mil-Spec Type II anodized coating in black. That makes it noticeably more durable than the original polymer release. It is backed by a limited lifetime warranty.



Reviews
There are no reviews yet.