Description
The Marble Arms Rifle Dovetail Front Ramp is a solid steel base built for anyone fitting up a rifle with iron sights or replacing a tired factory setup. This particular version is cut for a .625" barrel diameter and adds .225" of height measured from the bottom of the radius to the bottom of the dovetail, which is the difference between a front sight that lines up with your rear and one that leaves you shooting low. The radius on the underside is machined to sit flush against the barrel so the ramp follows the barrel's contour instead of perching awkwardly on top.
What Sets the Marble Arms Front Ramp Apart
Because it carries the industry standard .375" (3/8") dovetail, this ramp accepts a wide range of dovetail blades. You can run a plain brass or ivory bead for that classic look or drop in a fiber optic front sight if you want something that pops in low light. The whole point of the ramp is flexibility, so you build the front sight picture you actually want rather than living with whatever came on the gun. The top surface is machined to cut down on glare, which keeps your bead crisp when the sun is working against you.
Installing Your Marble Arms Dovetail Ramp
Mounting is straightforward for anyone comfortable at the bench. The ramp attaches with a single 6-48 screw that seats under the sight body, and the flat base is drilled for two additional mounting screws if you want extra hold. Many builders solder the ramp for a permanent, rock solid bond. If you have not fit a dovetail ramp before, having a gunsmith set it up is a smart move since getting the sight radius and windage right matters.
Marble Arms has been making rifle sights for well over a century out of Michigan, and their ramps remain a go-to for restoring old lever guns, single shots, and bolt actions that never had a proper front sight solution. Solid steel, made in the USA, and built to hold zero for the long haul.
Key Specifications
- Manufacturer: Marble Arms
- Manufacturer Part Number: 072330
- UPC: 871373007237
- Color: Black
- Material: Solid Steel
- Barrel Diameter (ID): .625"
- Dovetail Size: .375" (3/8")
- Sight Height: .225" (measured from bottom of radius to bottom of dovetail)
- Mounting Screw: 6-48
- Base: Flat, drilled for two mounting screws
- Country of Origin: Made in the USA
What’s Included
- Marble Arms .625" ID dovetail front ramp
- One 6-48 mounting screw
Frequently Asked Questions
What size dovetail blade fits this Marble Arms front ramp?
It uses the standard .375" (3/8") dovetail, which is the most common size in the industry. That means you can fit a Marble Arms bead or fiber optic front sight blade, and many other 3/8" dovetail blades will work as well. You may need to do a little light filing to get a nice snug fit, which is normal for dovetail parts.
Which barrels does the .625" ID ramp fit?
This ramp is machined with a radius to match a .625" barrel diameter at the point where the front sight sits. The curved underside lets it seat flush and follow the barrel's contour. If your barrel measures a different diameter at that spot, Marble Arms offers other radius options to match.
How much height does this ramp add?
It adds .225" of height, measured from the bottom of the radius to the bottom of the dovetail. That extra elevation is what lets you match your front sight up with your rear sight so you are not shooting low. If you need less rise, Marble Arms also makes a .100" height version for the same barrel diameter.
How is the front ramp installed?
The ramp attaches to the barrel with a single 6-48 screw that seats under the sight body, and the flat base is drilled for two more mounting screws. Many builders also solder it in place for a permanent bond. Because getting the alignment right matters, having a qualified gunsmith handle the fit is a good idea if you have not done this kind of work before.





Reviews
There are no reviews yet.