Description
The Scalarworks LEAP/05 takes the Trijicon MRO and sets it at the increasingly popular 1.93" center height over the rail, giving you that heads-up, nose-off-the-stock shooting position a lot of folks are chasing these days. It's machined from 7075-T6 aluminum and paired with 4140H steel hardware, so you get a stiff, rigid connection between your optic and your rifle without a bunch of extra weight hanging off the top rail. At right around 1.6 ounces, it's about as light as a mount in this category gets.
What Sets the LEAP/05 Mount Apart
The standout here is the ClickDrive quick-detach system. Instead of a big protruding lever or a thumbscrew that snags on slings, gear, and knuckles, the LEAP uses a low-profile recessed thumbwheel that sits flush and deflects impacts. You can pull the mount off or put it back on in a few seconds, with or without gloves, and it self-adjusts to the rail so you're not fighting with torque settings. Scalarworks backs it to hold zero under heavy recoil and return to zero every time you reinstall it.
Fit and Compatibility for the Trijicon MRO 1.93" Mount
This one is built specifically for the Trijicon MRO family, including the MRO, MRO HD, and MRO Patrol. It clamps to any MIL-STD-1913 Picatinny top rail, which covers AR-15 and AR-pattern platforms along with plenty of other rifles running a standard rail. A Type III hard-coat anodized finish on the aluminum and a flash nitride treatment on the steel keep everything protected through real-world use.
Height and Use Case
The 1.93" height is a favorite on modern carbines because it lines up nicely with a more upright head position and plays well with night vision and magnifier setups down the road. Worth noting, the MRO itself does not absolute co-witness with irons at this height, so this is the pick if you're running a dot-forward setup rather than trying to see backup sights through the optic. If co-witnessing is your priority, the lower 1.57" version of the LEAP is the better route. Hardware and the required Torx tool come in the box, so you'll have what you need to get it mounted and torqued down right.
Key Specifications
- Manufacturer: Scalarworks
- Manufacturer Part Number: SW0520
- UPC: 856481007171
- Model: LEAP/05
- Optic Compatibility: Trijicon MRO, MRO HD, MRO Patrol
- Center Height Over Rail: 1.93 in.
- Mount Type: Quick-Detach (ClickDrive)
- Rail Fit: MIL-STD-1913 Picatinny
- Materials: 7075-T6 Aluminum / 4140H Steel
- Finish: Type III Anodizing / Flash Nitride
- Weight: 1.61 oz
- Color: Black
- Country of Origin: United States
What’s Included
- Scalarworks LEAP/05 1.93" mount
- Mounting hardware (fasteners)
- Scalarworks Torx driver bit/tool
Frequently Asked Questions
Does the Scalarworks LEAP/05 mount fit all Trijicon MRO models?
Yes, this mount is designed for the Trijicon MRO footprint and works with the MRO, MRO HD, and MRO Patrol. It's built specifically for that optic family and won't fit other red dots with a different footprint. The optic itself is not included.
What does the 1.93" height mean for my setup?
The 1.93" measurement is the center height of the optic over the Picatinny rail. This taller height gives you a more heads-up shooting position that many people prefer on modern carbines, and it plays well with night vision down the line. Keep in mind the MRO does not absolute co-witness with iron sights at this height.
Is the LEAP/05 a quick-detach mount, and does it hold zero?
It is. The LEAP uses the ClickDrive quick-detach system with a recessed thumbwheel, so you can pull it off and reinstall in a few seconds with or without gloves. Scalarworks guarantees it returns to zero on reinstall and holds zero under heavy recoil thanks to the precision clamp and rigid construction.
Does it come with the hardware and tools to install it?
Yes. The mount ships with the required fasteners to attach your MRO as well as the Scalarworks Torx tool needed to get everything torqued properly. You'll have what you need in the box to mount it to a standard Picatinny rail.




Reviews
There are no reviews yet.