$96.99
3 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Most adjustable gas blocks work by restricting the gas port, which sounds fine until carbon builds up and seizes the screw. Superlative Arms took a different route. Their patented Bleed Off design vents excess gas out the front of the block, away from you, so only the pressure needed to cycle the bolt carrier ever reaches the action. The result is a rifle that runs cleaner, cooler, and with noticeably less felt recoil. This is the .936" journal version machined from 416 stainless steel with a matte finish, sized to fit AR-15, AR-10, and LR-308 barrels with the larger gas block seat.
Because the adjustment screw doesn't sit in the path of the gas flow, you don't get the erosion, seizing, or lost detent that plague conventional blocks after a few hundred rounds. The detent lives outside the block where carbon can't foul it, and Superlative built in a safety stop so you can't accidentally back the screw all the way out during a tuning session. You get 30 locked positions to work with, giving you fine control over exactly how your rifle cycles.
Setup is straightforward. Close the screw fully, then back it out 18 clicks to reach the fully open position. Positions below 18 restrict flow like a traditional block, while opening past 18 starts venting gas forward to the atmosphere. Suppressed and short-barrel builders tend to love this, since it lets you cut down on the blowback and gas-to-the-face that comes with running a can. Many folks setting up a suppressed SBR land somewhere in the low-to-mid twenties on the clicks and never look back.
This is a set-screw, solid mount block, so it slides onto a .936" journal and locks down with two set screws under your free-float handguard. It works across pistol, carbine, mid-length, and rifle-length gas systems. Whether you're building a pencil barrel, tuning a competition gun for faster follow-ups, or taming a suppressed hog rifle, this block gives you real control over how the whole system behaves.
This block is sized for a .936" gas block journal, which is the larger seat found on many heavier-profile AR-15, AR-10, and LR-308 barrels. It mounts as a solid, set-screw block and fits under most free-float handguards. It works with standard gas tubes across pistol, carbine, mid-length, and rifle-length gas systems, so measure your journal before ordering to confirm the .936" size.
Conventional adjustable blocks restrict the gas port, which can lead to carbon fouling that seizes the adjustment screw over time. The Superlative Arms Bleed Off system instead vents excess gas out the front of the block, so only the pressure needed to cycle the bolt reaches the action. Because the screw isn't sitting in the gas path, you avoid the erosion and lost detent that plague restrictive blocks.
Yes, it's one of the more popular choices for suppressed and SBR builds. When you run a can, extra gas normally gets forced back into the action and toward your face, and the forward-venting bleed off port lets that excess pressure escape before it travels back into the receiver. That translates to less blowback and a cleaner-running gun when suppressed.
Start with the adjustment screw closed all the way, then back it out 18 clicks to reach the fully open position. Anything below 18 clicks restricts flow like a traditional block, while opening past 18 begins venting gas forward to the atmosphere. From there, adjust in small increments until your rifle locks back reliably on an empty mag with the recoil you want, and always start tuning with the Bleed Off system active.
| UPC | 850011846155 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | SABO-DI-936SS |
You must be logged in to post a review.
Reviews
There are no reviews yet.