Description
Running a red dot on your Ruger SR series doesn't have to mean sending the slide out for machining. The EGW sight mount replaces the factory rear sight and gives you a sturdy platform for mounting a Vortex Viper or Venom micro red dot. It drops right into the existing dovetail, so there's no permanent modification to the gun and no waiting on a slide cut.
This mount is machined from 7075 aluminum with a matte black hardcoat anodized finish, so it holds up to real-world carry and range use. It measures 1.811 inches long and .99 inches wide, keeping the profile low and tucked in behind the optic. Beyond Vortex, it also accepts anything sharing the Docter and Burris FastFire footprint, so you've got options if you decide to switch optics down the road.
What the EGW Vortex Mount Fits
This one is cut specifically for the Ruger SR9, SR9C, SR40, SR40C, and SR45. Worth knowing up front: it does not fit the SR9E or the SR22, so double check your model before ordering. The dovetail has a progressive taper that makes the install smoother than muscling a flat dovetail into place, and EGW's mounts are designed to slide in from left to right with the muzzle pointed forward.
Installing the EGW Sight Mount on Your SR Pistol
Setup is about as simple as it gets for a dovetail mount. You remove the factory rear sight, slide the EGW mount into the dovetail, then bolt your optic down. The kit includes button head screws for the Vortex Viper and Venom along with flat head screws for FastFire and Docter sights. EGW recommends a drop of blue Loctite and torquing the screws to 15 inch-pounds, and the included hardware uses a 5/64 inch allen wrench. A small trick: slip a thin piece of paper between the optic and the mount during install to keep Loctite off your red dot and make future removal easier. And since nothing on the pistol gets altered, you can pull the mount and reinstall your rear sight any time you want.
Key Specifications
- Manufacturer: EGW (Evolution Gun Works)
- Manufacturer Part Number: 49290
- UPC: 841370117598
- Optic Footprint: Vortex Viper/Venom, Burris FastFire, Docter
- Fits: Ruger SR9, SR9C, SR40, SR40C, SR45
- Material: 7075 Aluminum
- Finish: Matte Black Hardcoat Anodized Type III
- Color: Black
- Mount Type: Dovetail (replaces rear sight)
- Overall Length: 1.811 in
- Overall Width: .99 in
- Number of Bases: 1-Piece
- Hardware Wrench Size: 5/64 in Allen
- Recommended Torque: 15 in-lbs
- Made In: USA
What’s Included
- EGW sight mount (1-piece)
- 2 button head cap screws (for Vortex Viper and Venom)
- 2 flat head cap screws (for Burris FastFire and Docter)
- Set screw
- Mounting instructions
Frequently Asked Questions
Which Ruger models does this EGW sight mount fit?
It fits the Ruger SR9, SR9C, SR40, SR40C, and SR45. It does not fit the Ruger SR9E or the SR22, so confirm your exact model before ordering.
Do I have to cut or modify my slide to use this mount?
No. The mount replaces the factory rear sight by sliding into the existing dovetail, so there's no machining or permanent alteration to the pistol. You can remove it and reinstall your original rear sight whenever you want.
What red dot optics will work on this EGW mount?
It's built for the Vortex Viper and Venom and also accepts any optic sharing the Burris FastFire or Docter footprint. The kit comes with the correct screws for both styles of optic.
What do I need to install the EGW sight mount?
The included screws use a 5/64 inch allen wrench. EGW recommends a drop of blue Loctite and torquing the mounting screws to 15 inch-pounds for a secure hold.




Reviews
There are no reviews yet.