0
0

EGW Trijicon RMR Sight Mount for S&W M&P Shield EZ, Black

UPC: 841370117574

$44.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The EGW Trijicon RMR Sight Mount is the clean, no-gunsmithing-required way to get a red dot onto your Smith & Wesson M&P Shield EZ. Instead of sending your slide off to be milled, this mount replaces your factory rear sight and gives your optic a stable platform to sit on. It's machined from 7075 aluminum with a matte black hardcoat anodized finish, so it's tough enough to shrug off recoil and daily carry wear while keeping a low, understated profile on the slide.

Fitment is specific and worth getting right. This mount is made for the M&P Shield EZ in both 9mm and .380 ACP, and it carries the Trijicon RMR footprint, which also accepts the Trijicon SRO and Holosun 407c/507c optics that share that pattern. It does not fit the standard M&P, the M&P 2.0, or the M&P 22. If you've got a Shield EZ and you're eyeing an RMR-footprint dot, this is the piece that bridges the two.

How the Shield EZ RMR Mount Installs

This is a press-fit mount that slides into your rear sight dovetail from left to right with the muzzle pointed forward. The dovetail has a progressive taper that helps it start easier and snug up tight as it seats. A rear sight pusher tool makes the job a whole lot smoother, both for knocking out the factory sight and seating the mount. Smith & Wesson dovetails are known to vary slightly, so expect a firm fit. Once it's in, you drop your optic on top, add a dab of blue Loctite to the included screws, and torque them to 15 in/lbs.

What You Get in the Box

EGW includes the mounting hardware you need to attach your optic: two 6-32 flat head screws and one 6-32 set screw. The mounting screws take a 5/64-inch Allen wrench. One nice detail about going the mount route instead of milling, you can pull the mount back off and reinstall your original rear sight whenever you want. It keeps your options open and your slide untouched.

Key Specifications

  • Manufacturer: EGW (Evolution Gun Works)
  • Manufacturer Part Number: 49542
  • UPC: 841370117574
  • Fits: S&W M&P Shield EZ 9mm and .380 ACP
  • Optic Footprint: Trijicon RMR / SRO, Holosun 407c / 507c
  • Material: 7075 Aluminum
  • Finish: Matte Black Hardcoat Anodized
  • Color: Black
  • Mount Type: Dovetail, Press Fit
  • Overall Length: 1.78 in
  • Overall Width: 1.1 in
  • Mounting Screw Torque: 15 in/lbs
  • Mounting Screw Wrench: 5/64 in Allen
  • Made In: USA

What’s Included

  • EGW Trijicon RMR dovetail sight mount
  • (2) 6-32 flat head screws
  • (1) 6-32 x 3/16 set screw

Frequently Asked Questions

Which pistols does this EGW Shield EZ mount fit?

It's built specifically for the Smith & Wesson M&P Shield EZ in both 9mm and .380 ACP. It does not fit the standard M&P, the M&P 2.0, or the M&P 22, so make sure you're running an actual Shield EZ before ordering.

What red dot optics will mount to it?

This mount uses the Trijicon RMR footprint, so it directly accepts the Trijicon RMR and SRO. Holosun 407c and 507c optics that share the RMR pattern will also bolt right on.

Do I need a gunsmith or special tools to install it?

This is a press-fit mount that replaces your factory rear sight, so a rear sight pusher tool makes the install much easier for both removing the old sight and seating the mount. Smith & Wesson dovetails can vary slightly in dimension, so expect a tight, firm fit. The mounting screws use a 5/64-inch Allen wrench and get torqued to 15 in/lbs with a dab of blue Loctite.

Can I go back to iron sights later?

Yes. One of the upsides of a mount versus milling your slide is that you can remove it and reinstall your original rear sight whenever you like. Your slide stays unmodified the whole time.

Additional information

UPC

841370117574

Manufacturer

Manufacturer Part Number

49542

Color

Black

Model

Style

Tactical

Reviews

There are no reviews yet.

Be the first to review “EGW Trijicon RMR Sight Mount for S&W M&P Shield EZ, Black”