0
0

EGW Novak-Style Trijicon RMR / Holosun 507C Sight Mount

UPC: 841370116782

$44.99

Out of stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Mounting a red dot on a pistol usually means sending the slide out for milling, but EGW's Novak-style sight mount skips all that. It replaces your rear iron sight right in the factory dovetail, giving you a sturdy platform for a Trijicon RMR, SRO, or Holosun 507C footprint optic. The part is machined from 7075 aluminum and wears a matte black hardcoat anodized finish, so it holds up to recoil and daily carry without looking beat up.

What the Novak-Style RMR Mount Fits

This mount is built for pistols with a traditional Novak-style rear sight cut, and the list is long. It covers a wide range of 1911s along with guns like the CZ 75 Bull Shadow, STI models with fixed rear sights, Christensen Arms 1911, Colt Delta Elite 10mm (2016 and newer), Ruger SR1911 with fixed rear sight, and more. On the optic side it accepts the Trijicon RMR and SRO plus the Holosun 407C and 507C family. Worth knowing up front: it is not designed for Rock Island 1911s, and some guns like Citadels and GSG .22s may need minor fitting to the sight base.

Installing the EGW Sight Mount

The idea here is simple. Drift out your rear sight, slide the mount into the dovetail from left to right with the muzzle pointed forward, and snug up the set screw if your setup uses one. The dovetail has a progressive taper that makes the fit go smoother. Dab a little blue Loctite on the two provided 6-32 flat head screws and torque them to 15 in/lbs using a 5/64 inch Allen wrench. Because nothing on the slide gets altered, you can pull the mount and reinstall your original rear sight whenever you want.

Why Go Novak Dovetail Instead of Milling

If you want a dot on your pistol but would rather not permanently cut the slide, this is a clean middle ground. All the mounting hardware comes in the box, and for best results a qualified gunsmith can confirm the dovetail fit on your specific pistol. It's a straightforward way to run a modern optic on a classic platform.

Key Specifications

  • Manufacturer: EGW (Evolution Gun Works)
  • Manufacturer Part Number: 49511
  • UPC: 841370116782
  • Material: 7075 Aluminum
  • Finish: Matte Black Hardcoat Anodized (Type III)
  • Overall Length: 1.780 in
  • Overall Width: 1.1 in
  • Red Dot Fitment: Trijicon RMR / SRO, Holosun 407C / 507C
  • Mounts To: Novak-style rear sight dovetail
  • Number of Bases: 1
  • Mounting Hardware: (2) 6-32 Flat Head Screws, (1) 6-32 x 3/16 Set Screw
  • Required Tool: 5/64 in Allen wrench
  • Recommended Torque: 15 in/lbs
  • Color: Black
  • Style: Tactical

What’s Included

  • EGW Novak-style sight mount
  • (2) 6-32 flat head mounting screws
  • (1) 6-32 x 3/16 set screw
  • Installation instructions

Frequently Asked Questions

Do I have to mill my slide to use the Novak-style RMR mount?

No. This mount installs in your existing rear sight dovetail after you drift out the factory rear sight, so no permanent slide machining is needed. It is fully reversible, meaning you can remove it and reinstall your original rear sight at any time.

Which red dot sights work with this EGW mount?

It is cut for the Trijicon RMR and SRO footprint along with the Holosun 407C and 507C family. If your optic uses the standard RMR footprint, it will sit on this mount. The two included flat head cap screws are provided for mounting the Trijicon RMR.

Will the Novak-style mount fit my pistol?

It is made for pistols with a traditional Novak-style rear sight cut, which covers many 1911s and guns like the CZ 75 Bull Shadow, STI fixed-rear models, Colt Delta Elite 10mm (2016 and newer), and Ruger SR1911 with fixed rear sight. It is not designed for Rock Island 1911s, and a few models such as Citadels and GSG .22s may need minor fitting. If you are unsure of your dovetail cut, checking with a gunsmith before ordering is a smart move.

What tools do I need to install it?

You will want a 5/64 inch Allen wrench for the included screws and some blue Loctite to keep them secure. Torque the mounting screws to 15 in/lbs. EGW recommends having the mount installed and checked by a qualified gunsmith for the best fit.

Additional information

UPC

841370116782

Manufacturer

Manufacturer Part Number

49511

Color

Black

Style

Tactical

Reviews

There are no reviews yet.

Be the first to review “EGW Novak-Style Trijicon RMR / Holosun 507C Sight Mount”