$44.99
5 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Running a CZ 75 series pistol and ready to go red dot? This EGW sight mount gives you a clean way to add a Trijicon RMR or compatible optic without sending your slide off for machining. It drops into the factory rear dovetail in place of your iron rear sight, which means no permanent changes to the gun and the option to put your rear sight back on whenever you want.
This one fits a wide spread of the CZ family, including the CZ 75, 75B, 75 SP-01, 75 SP-01 Phantom, 75 BD, CZ 85, 97B, 97D, P-01, and the PCR. It also works with the Tristar P120. Worth knowing up front: on the PCR there will be a small gap under the front of the adapter plate, which is normal for that model. It does not fit the CZ P-07 or P-09. Some SP-01 Shadow slides fit and some don't depending on the dovetail cut depth, so measuring before you buy is smart if that's your pistol.
The footprint is set up for the Trijicon RMR and SRO, plus a long list of Holosun optics in the 407C and 507C families. That gives you plenty of room to pair it with whatever dot you're already running or planning to pick up.
Machined from 7075 aluminum with a matte black hardcoat anodized finish, this mount is made in the USA and built to take recoil without shifting. It measures about 1.78 inches long and 1.1 inches wide and weighs right around an ounce, so it keeps the slim profile CZ shooters like. Installation is straightforward: pull the rear sight, slide the mount into the dovetail from left to right with the muzzle forward, snug the set screw, then mount your optic with the included screws and a dab of blue Loctite. Folks who've run it report a stable, repeatable point of impact and an easy bench install.
No. It installs in place of the factory rear sight by sliding into the existing dovetail, so there's no drilling, tapping, or milling. You can also pull the mount off and reinstall your original rear sight down the road if you ever want to.
The footprint is cut for the Trijicon RMR and SRO, along with a range of Holosun optics in the 407C and 507C families. If your dot uses the Trijicon RMR footprint, it should bolt right up.
On the PCR it fits but leaves a small gap under the front of the adapter plate, which is normal for that model. The SP-01 Shadow is hit or miss depending on your slide's dovetail cut depth, so measure before ordering if that's your pistol. It does not fit the P-07 or P-09.
Remove the factory rear sight, then slide the mount into the dovetail from left to right with the muzzle facing forward and tighten the set screw. Set your optic on top using the included screws with a bit of blue Loctite, and torque them to around 15 inch-pounds. The included screws take a 5/64 inch Allen wrench.
| UPC | 841370116478 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 49526 |
| Color | Black |
| Model | |
| Style | Tactical |
You must be logged in to post a review.
Reviews
There are no reviews yet.