Description
If you've been wanting to run a red dot on your Smith & Wesson M&P .22 Compact, this EGW sight mount is the straightforward way to get there. It drops right into the rear dovetail where your factory sight sits, giving you a stable platform to run a Trijicon RMR or SRO, as well as the Holosun 407c and 507c thanks to the shared RMR footprint. No slide milling, no gunsmith appointment, no permanent changes to your pistol.
How the M&P 22 Compact RMR Mount Goes On
Installation is about as simple as it gets. You remove the factory rear sight, press the EGW mount into the dovetail, and secure the red dot with the included hardware. This is a press fit mount, so a sight pusher tool makes the job cleaner, and EGW recommends a dab of blue Loctite on the mounting screws torqued to 15 in/lbs. The screws take a 5/64 inch allen wrench. Because nothing is altered on the slide itself, you can pull the mount back off and reinstall your original rear sight whenever you want.
Built From 7075 Aluminum
EGW machines this mount from 7075 aluminum and finishes it in a matte black hardcoat, so it holds up to range use without adding bulk. It measures 1.780 inches long and 1.1 inches wide, keeping the optic sitting low and tight to the slide. In the box you get the mount along with two 6-32 flat head screws for the optic and one 6-32 x 3/16 set screw.
A Few Things Worth Knowing
This mount is built specifically for the standard M&P .22 Compact and does not fit optics ready models or the smaller RMRcc footprint. Keep in mind that adding an optic and mount puts extra weight on the slide, which can affect cycling on a rimfire pistol, so running quality ammo helps things run smooth. Trijicon also suggests using a sealing plate under RMR-style optics to keep moisture out.
Key Specifications
- Manufacturer: EGW (Evolution Gun Works)
- Manufacturer Part Number: 49527
- UPC: 841370116461
- Fits: Smith & Wesson M&P .22 Compact
- Optic Footprint: Trijicon RMR / SRO, Holosun 407c / 507c
- Material: 7075 Aluminum
- Finish: Matte Black Hardcoat
- Mount Type: Rear Dovetail / Press Fit
- Overall Length: 1.780 in
- Overall Width: 1.1 in
- Number of Bases: 1-Piece
- Color: Black
- Made In: USA
What’s Included
- EGW M&P .22 Compact RMR sight mount
- (2) 6-32 flat head screws
- (1) 6-32 x 3/16 set screw
Frequently Asked Questions
Does this EGW mount fit the optics ready M&P 22 Compact?
No, this mount is designed for the standard M&P .22 Compact that uses a rear sight dovetail. It will not work with optics ready models that already have a cut in the slide. It also does not fit the smaller RMRcc footprint.
Which red dot sights will mount to it?
It uses the Trijicon RMR footprint, so Trijicon RMR and SRO optics bolt right up. Holosun 407c and 507c sights also share that footprint and will fit. Trijicon recommends adding a sealing plate under RMR-style optics to help keep moisture out.
Do I need a gunsmith to install this mount?
Not usually. You remove the factory rear sight and press the EGW mount into the dovetail, so no slide milling or permanent alterations are required. Since this is a press fit, a sight pusher tool makes the install easier, and you can swap your original rear sight back on anytime.
Will adding a red dot affect how my M&P 22 Compact cycles?
It can. Mounting an optic plus the mount adds weight to the slide, which on a rimfire pistol may influence reliable cycling. Running quality .22 LR ammo helps keep things running smoothly.




Reviews
There are no reviews yet.