Description
Putting a red dot on a Ruger PC Carbine is one of the quickest ways to speed up your target acquisition, and this EGW mount makes the whole job painless. It replaces the factory rear sight and gives you a solid platform for a Trijicon RMR or SRO, with no drilling, tapping, or permanent changes to the rifle. You pull the rear sight, slide the mount into the dovetail, and you are most of the way there.
What the EGW PC Carbine RMR Mount Is Made Of
This one is cut from 7075 aluminum and finished in a matte black hardcoat anodize, so it shrugs off the usual scuffs and weather that come with range time and field use. It measures 1.780 inches long and 1.1 inches wide, keeping things low and compact over the receiver. The hardware is included in the box, so you are not hunting for screws when you sit down to install it.
Fitment Notes for the Ruger PC Carbine Mount
Here is the detail worth knowing before you buy: this mount works with Ruger PC Carbines that do NOT have the AR style handguard. If your rifle runs the earlier style, you are good to go. Beyond the Ruger, EGW designed this same mount to fit a wide list of lever guns including several Henry and Marlin models, so it is a versatile piece if you own more than one of those platforms. It is cut for the Trijicon RMR and SRO footprint, and the same pattern accepts Holosun 407C and 507C optics as well.
Installing the EGW RMR Mount
Installation is straightforward. Remove the rear sight, slide the EGW mount into the dovetail from left to right with the muzzle facing forward, and tighten the set screw. EGW recommends laying a small piece of paper between your optic and the mount before you set your screws, which keeps Loctite off the dot and makes future removal easier. A dab of blue Loctite on the mounting screws and a torque of 15 inch-pounds locks everything in place. When you want your iron sights back, the mount comes right off.
Key Specifications
- Manufacturer: EGW (Evolution Gun Works)
- Manufacturer Part Number: 49531
- UPC: 841370116423
- Model: PC Carbine
- Optic Cut: Trijicon RMR / SRO (also fits Holosun 407C / 507C)
- Material: 7075 Aluminum
- Finish: Matte Black Hardcoat Anodize
- Color: Black
- Overall Length: 1.780 in
- Overall Width: 1.1 in
- Mount Style: Rear sight dovetail replacement
- Number of Bases: 1
- Fitment Note: Fits Ruger PC Carbines without the AR style handguard
- Made In: USA
What’s Included
- EGW Trijicon RMR / SRO sight mount
- (2) 6-32 flat head mounting screws
- (1) 6-32 x 3/16 set screw
Frequently Asked Questions
Does this mount fit every Ruger PC Carbine?
It fits Ruger PC Carbines that do not have the AR style handguard. If your rifle runs the earlier non-AR handguard setup, this mount is the right match. Double check your handguard style before ordering to be sure.
Which optics work with the EGW PC Carbine RMR mount?
The mount is cut for the Trijicon RMR and SRO footprint. That same pattern also accepts the Holosun 407C and 507C, so you have a few popular options to choose from. It will not fit optics built on a different footprint.
Do I need to drill or tap my rifle to install it?
No permanent modifications are needed. You remove the factory rear sight, slide the mount into the dovetail, and secure it with the included hardware. You can take the mount back off and reinstall your original rear sight whenever you want.
Does the mount come with the screws I need?
Yes, all the mounting hardware is included in the box. You get two 6-32 flat head screws and a 6-32 set screw. EGW suggests a dab of blue Loctite on the mounting screws and a torque of 15 inch-pounds for a secure hold.





Reviews
There are no reviews yet.