Description
Want to run a red dot on your standard CZ Shadow 2 but don't want to send the slide off for milling? This EGW sight mount is the clean, reversible way to do it. It drops into the rear dovetail in place of your factory rear sight and gives you a solid platform for an RMR-footprint optic. No permanent changes to the gun, and if you ever want your iron sights back, you just pull the mount and reinstall the rear sight.
What the EGW Shadow 2 Mount Fits
This one is built for the standard CZ Shadow 2, as well as the CZ 75 Shadow and CZ 75 SP-01 Shadow. It is cut for the Trijicon RMR and SRO footprint, which also covers the Holosun 407C and 507C family along with Swampfox Kingslayer, Liberty, and Justice optics. Worth noting up front: this mount does not fit the Shadow 2 Optics Ready, the Shadow 2 Kadet, or the DWX. Those use a different system, so if you're running a factory optics-ready slide, this isn't your part.
Build and Fitment on the CZ Shadow 2 Dovetail
EGW machines these from 7075 aluminum with a matte black hardcoat anodized finish, so it holds up to recoil and keeps a consistent zero. The dovetail uses a progressive taper to make the install easier, and the whole piece is low profile so it doesn't add a bunch of bulk or throw off the balance you're used to on the Shadow 2. It comes in at 1.78 inches long and 1.1 inches wide, weighing about an ounce, so it stays out of the way.
Getting Your RMR Mount Installed
Installation is straightforward for most folks. You remove the factory rear sight, slide the mount into the dovetail from left to right with the muzzle forward, and secure your optic with the included hardware. Mounting screws take a 5/64 inch Allen wrench, and a touch of blue Loctite on the optic screws will keep everything locked in under recoil. All the hardware you need comes in the box.
Key Specifications
- Manufacturer: EGW (Evolution Gun Works)
- Manufacturer Part Number: 49532
- UPC: 841370116416
- Fits: Standard CZ Shadow 2, CZ 75 Shadow, CZ 75 SP-01 Shadow
- Does Not Fit: Shadow 2 Optics Ready, Shadow 2 Kadet, DWX
- Optic Footprint: Trijicon RMR / SRO (also Holosun 407C/507C, Swampfox Kingslayer/Liberty/Justice)
- Mount Type: Rear dovetail sight mount
- Material: 7075 Aluminum
- Finish: Matte Black Hardcoat Anodized
- Overall Length: 1.780 in
- Overall Width: 1.1 in
- Weight: Approx. 1.12 oz
- Color: Black
- Mounting Hardware Tool: 5/64 in Allen wrench
What’s Included
- EGW CZ Shadow 2 Trijicon RMR sight mount
- (2) 6-32 flat head screws
- (1) 6-32 set screw
Frequently Asked Questions
Does this EGW mount fit the CZ Shadow 2 Optics Ready?
No, it does not. This mount is made for the standard, non-optics-ready CZ Shadow 2, as well as the CZ 75 Shadow and SP-01 Shadow. The factory Optics Ready and Compact Optics Ready models use a different plate system, so you'll want EGW's optics-ready plate instead.
Which red dots work with the CZ Shadow 2 RMR mount?
It uses the Trijicon RMR and SRO footprint. That same footprint covers the Holosun 407C and 507C family along with Swampfox Kingslayer, Liberty, and Justice optics. If your red dot uses the RMR footprint, it should bolt right up.
Do I have to mill my slide to use this mount?
Nope, that's the whole point of it. The mount replaces your rear sight in the dovetail with no permanent changes to the gun. You can pull it off and reinstall your factory rear sight anytime you want.
What do I need to install it?
The mounting screws take a 5/64 inch Allen wrench, and all the hardware comes in the box. A dab of blue Loctite on the optic screws is a smart move to keep your zero under recoil. Removing a snug factory rear sight may call for a sight pusher or a brass punch and patience.




Reviews
There are no reviews yet.