0
0

EGW CZ 527 16mm 1-Piece Picatinny Base 0 MOA Scope Mount

UPC: 841370115990

$80.99

10 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Dropping a quality optic on your CZ 527 starts with a base that locks down tight and stays put, and this EGW one-piece rail is built to do exactly that. It's machined specifically for the CZ 527's 16mm dovetail, so you're not fighting a loose or sloppy fit. The 0 MOA elevation gives you a flat mounting surface, which is the setup EGW recommends for anyone shooting inside the 0 to 500 yard range, covering just about everything you'd ask of a 527 whether you're walking into the woods or ringing steel at the range.

What Sets the EGW CZ 527 Picatinny Base Apart

EGW machines these in house from solid 7075 T6 aircraft grade aluminum, then tumbles, sandblasts, and finishes them with a Type III hard coat anodize. That combination keeps things light at around 4.6 ounces while standing up to real field abuse. The Picatinny cross slots run the full length of the rail and are cut to MIL-STD 1913 spec, so you get genuine flexibility in where your rings sit and the eye relief you can dial in.

Mounting Your Optic on the CZ 527 16mm Rail

Since it's a true Picatinny profile, it plays nice with any Picatinny or Weaver scope rings, including quick-disconnect styles if you like pulling your glass on and off. The rail is ambidextrous and leaves the ejection port clear. EGW includes the mounting screws and a T-15 bit to get you started, and a drip of blue thread locker on the base screws is a smart move to keep everything honest after a few range sessions.

If you've got a CZ 527 and want a straightforward, durable foundation for your scope or red dot, this is the kind of base that earns its keep. It's made in the USA, it fits right, and it gives your optic the stable home it needs to hold zero.

Key Specifications

  • Manufacturer: EGW (Evolution Gun Works)
  • MPN: 80928
  • UPC: 841370115990
  • Model Fit: CZ 527 (16mm Dovetail)
  • Style: One-Piece Picatinny Rail
  • Elevation: 0 MOA
  • Material: Solid 7075 T6 Aircraft Grade Aluminum
  • Finish: Matte Black Type III Hard Coat Anodized
  • Color: Black
  • Overall Length: 5.094 in
  • Height (Receiver to Top of Rail): 0.539 in
  • Weight: 4.6 oz
  • Ejection Port Opening: 2.375 in
  • Ring Compatibility: Picatinny or Weaver (Quick Disconnect Compatible)
  • Made In: USA

What’s Included

  • EGW CZ 527 16mm 1-Piece Picatinny Base (0 MOA)
  • #6-32 x 1 inch mounting screws
  • T-15 bit

Frequently Asked Questions

Will this base fit my CZ 527?

It's made specifically for CZ 527 models that use the 16mm dovetail, so if your 527 has that dovetail you're good to go. Double check your receiver dovetail width before ordering, since CZ has used different dovetail sizes across various rimfire and centerfire models. This one is cut for the 16mm pattern found on the 527.

What does the 0 MOA elevation mean, and should I get 0 MOA or 20 MOA?

0 MOA means the rail sits flat with no built-in forward cant, which keeps your optic centered in its adjustment range. EGW recommends the 0 MOA version for shooting inside the 0 to 500 yard range, which covers most CZ 527 use. If you plan to stretch things out toward 500 to 1000 yards you'd want a 20 MOA base instead to gain extra elevation.

What scope rings work with this Picatinny base?

It's a true Picatinny profile, so any Picatinny or Weaver scope rings will clamp right on. It's also compatible with quick-disconnect ring systems if you like being able to remove your optic and return to zero. Just pick the ring height that gives your scope's objective proper clearance over the rail.

Does it come with the hardware to install it?

Yes, EGW includes the mounting screws and a T-15 bit so you can get it on the rifle without a trip to the hardware store. A drip of blue thread locker on the base screws is a good idea to keep things from backing out under recoil. Snug the screws down to the recommended torque and you're set.

Additional information

UPC

841370115990

Manufacturer

Manufacturer Part Number

80928

Color

Black

Model

Style

Picatinny Rail

Reviews

There are no reviews yet.

Be the first to review “EGW CZ 527 16mm 1-Piece Picatinny Base 0 MOA Scope Mount”