Description
If you have been wanting to run a red dot on your FN FNS or FNX but don't love the idea of permanently cutting the slide, this EGW mount is the simple way to get there. It replaces the factory rear sight by sliding into the existing dovetail, giving you a solid base for a Vortex Viper or Venom, Burris FastFire, or Docter footprint optic. When you want your iron sight back, the plate comes off and the original sight goes right back in, no permanent changes made.
EGW machines this one from 7075 aluminum and finishes it with a Type III matte black hardcoat anodizing, so it holds up to real range use and matches the look of your slide rather than standing out. It carries the Docter / Vortex / Burris FastFire footprint, which opens the door to a wide list of compatible dots including the Crimson Trace CTS-1200, UTG Reflex Micro Dot, and several ADE models. Overall length runs about 1.811 inches and width sits at .99 inches, keeping the footprint close to the slide width for a clean profile.
What the EGW FN FNS/FNX Mount Fits
This plate is built specifically for the FN FNS and FNX families, covering the FNS-9, FNS-9C, FNS-40, FNS-40C, FNX-9, FNX-40 and FNX-45. It does not fit the FN FNP, the FN 5.7, or any factory optics ready model, so if your pistol already came cut for a dot from FN, this is not the part you need.
Installing the EGW Viper/Venom Mount
This is a press fit mount that seats into the rear dovetail, so a quality sight pusher makes the job far easier since well-made dovetails run tight. All the mounting hardware is included, and EGW recommends a dab of blue Loctite on the screws torqued to 15 in/lbs. If you aren't comfortable pushing a dovetail yourself, a gunsmith can knock this out quickly.
Key Specifications
- Manufacturer: EGW (Evolution Gun Works)
- Manufacturer Part Number: 49304
- UPC: 841370114528
- Model Fit: FN FNS-9, FNS-9C, FNS-40, FNS-40C, FNX-9, FNX-40, FNX-45
- Optic Footprint: Docter / Vortex Viper & Venom / Burris FastFire
- Material: 7075 Aluminum
- Coating: Matte Black Hardcoat, Type III Anodized
- Color: Black
- Overall Length: 1.811 in
- Overall Width: .99 in
- Mount Type: Rear sight dovetail, press fit
- Torque Spec: 15 in/lbs
- Country of Origin: Made in USA
- Style: Tactical
What’s Included
- EGW FN FNS/FNX sight mount plate
- (2) 6-32 x 3/8 flat head cap screws (for Burris FastFire and Docter)
- (2) 6-32 x 5/16 button head screws (for Vortex Viper and Venom)
- (1) 6-32 x 3/16 cup point set screw
Frequently Asked Questions
Does the EGW FN FNS/FNX mount fit optics ready models?
No. This plate is designed for standard FN FNS and FNX slides that use the factory rear sight dovetail. If your pistol already came from FN cut for an optic, this mount will not work and you would use the factory plate system instead.
Which red dots work with this mount?
It carries the Docter / Vortex / Burris FastFire footprint, so it accepts the Vortex Viper and Venom, Burris FastFire, Docter, UTG Reflex Micro Dot, and several Crimson Trace and ADE models. The correct screws for the Vortex and FastFire/Docter optics come in the box. Note that the enclosed-emitter Venom is a different footprint and is not covered here.
Do I need to mill or modify my slide to use this?
No permanent machining is required. The mount seats into the existing rear sight dovetail, so you simply remove the factory rear sight and press this plate in its place. You can pull it back out and reinstall your original rear sight whenever you want.
Is installation something I can do at home?
It is a press fit mount, so a solid sight pusher tool makes it manageable since quality dovetails are usually snug. EGW includes the hardware and recommends blue Loctite on the screws torqued to 15 in/lbs. If you don't have a pusher or aren't confident, a gunsmith can install it quickly.




Reviews
There are no reviews yet.