Description
This is EGW's heavy-duty one-piece Picatinny base built specifically for the Howa Mini Action receiver, and it's the kind of upgrade that pays for itself the first time you push your rifle out past the 500 yard mark. It's machined from solid 7075 T6 aircraft-grade aluminum with a matte black hardcoat anodized finish, so it shrugs off recoil, holds zero, and takes the abuse of real field use without complaint. At just 2.5 ounces it keeps your build light, and the full-length Picatinny cross slots give you plenty of room to position your rings exactly where your eye relief wants them.
Why the 20 MOA Cant Matters on a Howa Mini Action
That built-in 20 MOA slope angles your optic forward, which hands back a big chunk of internal elevation travel in your scope. For anyone shooting past 500 yards, that extra adjustment is what keeps you dialed on target when a standard flat base would leave you topped out. EGW suggests the 20 MOA option for roughly 500 to 1000 yard work, and recommends zeroing at 200 yards to get the most out of that geometry.
Fit and Compatibility of This Howa Mini Action Base
This rail is cut for the Howa Mini Action, the short receiver found on chamberings like .223 Rem, 7.62×39, .204 Ruger, 6.5 Grendel, and .222 Rem. It will not fit the Howa 1500 Superlite, so match your receiver before ordering. It's a true Picatinny profile that works with any Picatinny or Weaver style rings, and it's quick-disconnect ring compatible for optics you want to pull on and off. The base is beveled on both sides, making it fully ambidextrous.
Getting the EGW Howa Mini Action Rail Mounted
Installation is straightforward. The included #6-48 screws and T-10 bit get you squared away, and EGW calls for 20 inch pounds of torque with a drop of blue threadlocker to keep everything locked down shot after shot. The whole thing, hardware included, is made in the USA from U.S. sourced materials.
Key Specifications
- Manufacturer: EGW (Evolution Gun Works)
- Manufacturer Part Number: 81062
- UPC: 841370114511
- Fits: Howa Mini Action
- Elevation / Cant: 20 MOA
- Rail Type: One-Piece Picatinny
- Material: Solid 7075 T6 Aircraft-Grade Aluminum
- Finish: Matte Black Hardcoat Anodized
- Overall Length: 5.882 in
- Center Spread: 3.155 in
- Height (Receiver to Top of Picatinny): 0.35 in
- Weight: 2.5 oz
- Quick Disconnect Ring Compatible: Yes
- Ambidextrous: Yes
- Ring Compatibility: Picatinny or Weaver
- Country of Origin: USA
What’s Included
- HD Howa Mini Action 20 MOA Picatinny base
- #6-48 x 1/4 mounting screws
- T-10 bit
Frequently Asked Questions
Which rifles does the EGW Howa Mini Action Picatinny base fit?
This base is cut specifically for the Howa Mini Action receiver, which is the short action found on chamberings like .223 Rem, 7.62×39, .204 Ruger, 6.5 Grendel, and .222 Rem. It will not fit the Howa 1500 Superlite. It's always smart to measure your receiver hole spacing against the mount dimensions before installing.
What does the 20 MOA on this Howa Mini Action base actually do?
The 20 MOA cant angles the rail forward, which gives your scope back a significant amount of internal elevation travel. That extra adjustment is what lets you dial out to longer distances without running out of room in your optic. EGW suggests the 20 MOA version for roughly 500 to 1000 yard shooting and recommends a 200 yard zero.
What rings do I need for this Picatinny base?
The rail uses a standard Picatinny profile, so it works with any Picatinny or Weaver style scope rings. It's also quick-disconnect ring compatible if you like being able to remove your optic and return it to zero. Rings are not included, so you'll want to pick those up separately based on your scope tube diameter and objective size.
Is this an easy install on a Howa Mini Action?
It is. The base comes with the #6-48 screws and a T-10 bit you need to get it on, so you're not hunting for extra hardware. EGW recommends torquing the screws to 20 inch pounds with a drop of blue threadlocker to keep everything locked in under recoil.



Reviews
There are no reviews yet.