0
0

EGW Sight Mount H&K USP for Vortex Viper/Venom – Black 49305

UPC: 841370114214

$44.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Adding a red dot to a full-size H&K USP has never needed slide milling, and this EGW mount proves it. Instead of sending your pistol off to a gunsmith for an optic cut, you pull the factory rear sight and slide this adapter into the existing dovetail. It gives you a solid, low-profile platform for a Vortex Viper, Vortex Venom, Burris FastFire, or Docter sight, and best of all the whole thing is reversible if you ever want your iron rear sight back.

What the EGW USP Sight Mount Fits

This is the 49305, built specifically for the standard full-size USP family. It fits the USP 9mm, USP .40 S&W, USP .45 ACP, and both the USP Tactical 9mm and USP Tactical .45 ACP. It does not fit the USP Compact, Elite, or Expert, since those use a different rear sight cut, so double-check which USP you're running before ordering. On the optic side it accepts the Docter/Vortex/Burris FastFire footprint, which covers the Viper, the open-emitter Venom, the FastFire series, and Docter red dots.

Built From 7075 Aluminum for Daily Carry and Range Use

EGW machines this mount from 7075 aircraft-grade aluminum and finishes it in a matte black hardcoat anodize, so it holds up to recoil and handling without looking beat up. The dovetail has a progressive taper that makes the press fit easier to seat, and EGW designs these to install left to right with the muzzle facing forward. Overall it runs about 1.81 inches long and just under an inch wide, keeping your optic sitting nice and low over the bore. The whole mount, hardware, and packaging are made in the USA.

Everything you need to get it on the gun comes in the box. You get two button head screws for the Vortex optics, two flat head screws for the FastFire and Docter sights, and a set screw, all 6-32 thread. The screws take a 5/64 inch Allen wrench, and a dab of blue Loctite with the screws torqued to spec keeps your dot locked in place. A sight pusher makes seating the dovetail a lot smoother if you've got one.

Key Specifications

  • Manufacturer: EGW (Evolution Gun Works)
  • Manufacturer Part Number: 49305
  • UPC: 841370114214
  • Model: H&K USP
  • Fits Pistols: USP 9mm, USP .40 S&W, USP .45 ACP, USP Tactical 9mm, USP Tactical .45 ACP
  • Optic Footprint: Vortex Viper, Vortex Venom (open emitter), Burris FastFire, Docter
  • Material: 7075 Aircraft-Grade Aluminum
  • Finish: Matte Black Hardcoat Anodize
  • Color: Black
  • Overall Length: 1.811 in
  • Overall Width: 0.99 in
  • Mounting Hardware Thread: 6-32
  • Wrench Size: 5/64 in Allen
  • Made In: USA

What’s Included

  • EGW H&K USP sight mount
  • (2) 6-32 button head screws (for Vortex Viper/Venom)
  • (2) 6-32 flat head screws (for Burris FastFire/Docter)
  • (1) 6-32 set screw

Frequently Asked Questions

Do I need to mill or cut my USP slide to use this EGW mount?

No. This mount replaces your factory rear sight and seats into the existing dovetail, so there's no slide machining involved. It's also fully reversible, meaning you can pull the mount and reinstall your iron rear sight whenever you want.

Which USP models does the 49305 mount fit?

It's built for the standard full-size USP, including the USP 9mm, USP .40 S&W, USP .45 ACP, and the USP Tactical 9mm and .45 ACP. It does not fit the USP Compact, Elite, or Expert because those have a different rear sight cut. Confirm which USP you have before ordering.

What red dot sights will mount to this?

It uses the Docter/Vortex/Burris FastFire footprint, so it accepts the Vortex Viper, the open-emitter Vortex Venom, the Burris FastFire series, and Docter red dots. The included screws are sorted for each type, with button head screws for the Vortex optics and flat head screws for the FastFire and Docter.

What tools do I need to install it?

A 5/64 inch Allen wrench handles the mounting screws, and a sight pusher tool makes seating the dovetail a lot easier since this is a press fit. EGW recommends a dab of blue Loctite on the screws and torquing them to 15 in/lbs so your optic stays put under recoil.

Additional information

UPC

841370114214

Manufacturer

Manufacturer Part Number

49305

Color

Black

Model

Style

Tactical

Reviews

There are no reviews yet.

Be the first to review “EGW Sight Mount H&K USP for Vortex Viper/Venom – Black 49305”