0
0

EGW HD Browning A-Bolt Long Action 1-Piece Picatinny Rail 20 MOA

UPC: 841370114122

$62.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

This EGW HD Picatinny base is a one-piece scope mount made specifically for the Browning A-Bolt long action, and it's the part you want when you're done fighting with factory bases and ring setups. It's machined from domestic 7075-T6 aluminum, finished in matte black anodizing, and built with a 20 MOA cant that gives you extra elevation adjustment for stretching your shots out past the mid-range distances. At roughly 2 ounces and about 7 inches long, it adds a continuous Picatinny platform across the receiver without bogging the rifle down.

What the 20 MOA Cant Does for Your A-Bolt

The built-in 20 MOA of forward slope tilts your scope down slightly, which banks extra elevation into your optic so you have more clicks left when dialing for longer distances. EGW suggests a 20 MOA base if you're planning to work out past 500 yards, and they recommend zeroing at 200 yards to make the most of that range. If you stick closer to 500 and in, a flat 0 MOA base is plenty, but for anyone who wants the reach, this cant pays off.

Fitment and Build on the HD Browning A-Bolt Rail

This one is designed for the standard Browning A-Bolt and A-Bolt 2 long action. It does not fit the AB3, the X-Bolt, or the A-Bolt Mountain Titanium in .300 WSM, so double-check which Browning you're running before ordering. The cross slots run the full length of the rail, so you've got room to slide rings fore and aft to nail eye relief, and the center is relieved to cut weight. Beveled on both sides, it works just as well for lefties as righties.

Mounting the EGW A-Bolt Picatinny Base

Installation is straightforward. The rail takes any Picatinny or Weaver-style rings, and EGW recommends torquing the base screws to 20 inch-pounds with a drop of blue thread locker for a setup that stays put under recoil. The whole thing is made in the USA, which is a nice touch for a part that's going to see years of hunting and range time.

Key Specifications

  • Manufacturer: EGW (Evolution Gun Works)
  • Manufacturer Part Number: 81028
  • UPC: 841370114122
  • Fits: Browning A-Bolt / A-Bolt 2 Long Action
  • Rail Type: One-Piece Picatinny
  • Cant / Elevation: 20 MOA
  • Material: 7075-T6 Aluminum
  • Finish: Matte Black Anodizing
  • Overall Length: 7.064 in
  • Center Spread: 3.86 in
  • Height: 0.35 in (top of receiver to top of rail)
  • Weight: Approx. 2 oz
  • Ambidextrous: Yes (beveled both sides)
  • Ring Compatibility: Picatinny or Weaver
  • Mounting Hardware: #6-48 x 1/4 screws and T-10 bit included
  • Made In: USA

What’s Included

  • EGW HD one-piece Picatinny base
  • #6-48 x 1/4 mounting screws
  • T-10 Torx bit

Frequently Asked Questions

Which Browning rifles does this A-Bolt Picatinny base fit?

It's made for the standard Browning A-Bolt and A-Bolt 2 long action receivers. It does not fit the Browning AB3, the X-Bolt, or the A-Bolt Mountain Titanium in .300 WSM. If you're unsure which action you have, measuring your receiver hole spacing against the published dimensions is a good way to confirm before mounting.

Do I need the 20 MOA version or a 0 MOA base?

The 20 MOA cant is geared toward longer distances, since it banks extra elevation into your scope. EGW suggests 20 MOA if you plan to shoot past 500 yards and a 0 MOA base if you stay inside that range. With a 20 MOA base, zeroing at 200 yards is the recommended starting point.

What rings work with this rail?

It's a standard Picatinny-style base, so it accepts any Picatinny or Weaver-pattern scope rings. The cross slots run the full length of the rail, which gives you plenty of room to position rings fore and aft for proper eye relief. Rings are sold separately.

Is any hardware included, and how should I install it?

Yes, the base ships with #6-48 x 1/4 screws and a T-10 Torx bit. EGW recommends torquing the screws to 20 inch-pounds and adding a drop of blue thread locker so everything stays tight under recoil. A proper torque wrench takes the guesswork out of getting it right.

Additional information

UPC

841370114122

Manufacturer

Manufacturer Part Number

81028

Action

Color

Black

Model

Style

Picatinny Rail

Reviews

There are no reviews yet.

Be the first to review “EGW HD Browning A-Bolt Long Action 1-Piece Picatinny Rail 20 MOA”