Description
The EGW Thompson Center Dimension Picatinny Base is a purpose-built, one-piece rail cut to fit the T/C Dimension receiver and nothing else. Instead of fighting with a two-piece setup or a generic rail that almost lines up, you get a single solid platform that gives your rings a consistent, repeatable home. The rail is machined from domestic 6061 T6 extruded aluminum and finished in matte black Type II anodizing, so it shrugs off the knocks and weather that come with a season in the field.
Why the Dimension Rail Earns Its Spot
Picatinny cross slots run the full length of the rail, so you've got real flexibility in where your rings sit. That matters when you're chasing the right eye relief with a variable scope or running a longer optic. There's a machined channel down the center that trims weight off the mount, bringing it in right around 2 ounces, and in many cases it leaves your factory iron sights usable underneath.
Picking 0 MOA vs 20 MOA
This is the flat 0 MOA version, which is the one most folks want. EGW recommends 0 MOA for shooting roughly 0 to 500 yards, which covers the vast majority of hunting and range work. If you're stretching things out past 500 and into the 1000-yard range, that's where a 20 MOA rail comes into play, but for general-purpose use on a Dimension, the 0 MOA keeps your scope's elevation travel centered where you want it.
Installation and Fit Notes
Setup is straightforward. The rail is ambidextrous and uses the included mounting screws and bit. EGW calls for 20 inch-pounds of torque and a drop of blue thread locker on the screws to keep everything locked down under recoil. The center spread measures 3.44 inches, and it's a good habit to confirm the hole spacing on your receiver matches before you button it up. One thing worth knowing up front: this base is not quick-disconnect ring compatible, so plan your ring choice accordingly.
Key Specifications
- Manufacturer: EGW (Evolution Gun Works)
- MPN: 46950
- UPC: 841370113408
- Model: Thompson Center Dimension
- Rail Type: One-Piece Picatinny
- Elevation: 0 MOA
- Material: Domestic 6061 T6 Extruded Aluminum
- Finish: Matte Black Type II Anodized
- Overall Length: 6.88 in
- Center Spread: 3.44 in
- Height: 0.4 in (receiver to top of rail)
- Weight: Approx. 2 oz
- Ambidextrous: Yes
- Quick Disconnect Ring Compatible: No
- Torque Spec: 20 in-lbs
- Made In: USA
What’s Included
- EGW Thompson Center Dimension one-piece Picatinny base (0 MOA)
- Mounting screws
- Installation bit
Frequently Asked Questions
What rifle does the Thompson Center Dimension Picatinny base fit?
This rail is machined specifically for the Thompson Center Dimension rifle. It is not a universal base, so it's cut to match that receiver's hole pattern with a 3.44 inch center spread. It's always smart to measure your receiver's hole spacing against the published dimensions before installing.
Should I get the 0 MOA or 20 MOA version?
EGW recommends the 0 MOA base for shooting from 0 to 500 yards, which fits most hunting and range situations. The 20 MOA version is geared toward longer distances out to around 1000 yards where you want extra elevation built into the rail. For a typical Dimension setup, this 0 MOA version is the one most people reach for.
What rings work with this base?
It's a true Picatinny rail with full-length cross slots, so it accepts any standard Picatinny or Weaver scope rings. The full-length slots give you room to slide rings forward or back to dial in eye relief. Keep in mind it is not compatible with quick-disconnect rings.
Will this base block my iron sights?
In many cases it won't. The machined channel down the center of the rail reduces mass and often leaves the factory iron sights usable underneath. Clearance can vary with your specific sight setup, so it's worth a quick look once mounted.




Reviews
There are no reviews yet.