0
0

EGW Sight Mount for Vortex Viper/Venom – SIG P220-229/320 Black

UPC: 841370112920

$45.00

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you've got a SIG P-series pistol that didn't come optics ready and you don't want to pay a gunsmith to mill the slide, this EGW mount is the simple way in. It drops into your factory rear sight dovetail and gives you a low, stable platform for a reflex sight. No permanent changes to the slide, and you can pull it back off and reinstall your original rear sight down the road if you change your mind.

The mount is machined in the USA from 7075 aluminum and wears a matte black hardcoat anodized finish, so it holds up to real range use and recoil. It sits lower than most Picatinny rail adapter setups, which means a cleaner look and a more natural sight picture when you present the pistol. Overall length runs about 1.811 inches with a width right around .99 inches, keeping the footprint tight on the slide.

What the EGW SIG Sight Mount Fits

This one covers a wide range of SIGs that use the #8 rear sight dovetail, including the P220, P224, P225, P226, P227, P228, P229, P238, P239, P245, P320 (non-optics-ready), P938, SP2022, M11-A1, and MK25. On the optic side it accepts the Vortex Viper and Venom, Burris FastFire series, Docter, UTG Reflex Micro Dot, Crimson Trace CTS-1200 and CTS-1300, and Sightmark Mini Shot, among other Docter footprint red dots. A quick heads up on fitment: it does not work with any optics-ready SIG models such as the Legion RX, P229 RX, or P320 X-Carry, and it won't fit the P210 Target, P365, SIG 1911s, or FN 509 Tactical.

Getting the EGW Mount Installed

Setup is about as straightforward as it gets. Pull your factory rear sight out of the dovetail, slide the EGW mount in from left to right with the muzzle facing forward, then seat your optic. The hardware comes in the box, including button head screws for the Vortex Viper and Venom and flat head screws for Burris FastFire and Docter optics. Run a dab of blue Loctite on the screws and torque them to 15 in/lbs. A 5/64 inch allen wrench handles the install, and a sight pusher makes removing the old rear sight a lot easier.

Key Specifications

  • Manufacturer: EGW (Evolution Gun Works)
  • Manufacturer Part Number: 49318
  • UPC: 841370112920
  • Material: 7075 Aluminum
  • Finish: Matte Black Hardcoat Anodized
  • Overall Length: 1.811 in
  • Overall Width: 0.99 in
  • Mounting Style: Rear Sight Dovetail Replacement
  • Optic Footprint: Docter / Vortex Viper / Vortex Venom / Burris FastFire
  • Fits: SIG #8 dovetail: P220, P224, P225, P226, P227, P228, P229, P238, P239, P245, P320 (non-optics-ready), P938, SP2022, M11-A1, MK25
  • Torque Spec: 15 in/lbs
  • Wrench Required: 5/64 in Allen
  • Made In: USA

What’s Included

  • EGW sight mount (1)
  • 6-32 button head screws for Vortex Viper and Venom (2)
  • 6-32 flat head screws for Burris FastFire and Docter (2)
  • 6-32 set screw (1)

Frequently Asked Questions

Will this EGW mount fit my optics-ready SIG?

No. This mount is made specifically for non-optics-ready SIG pistols that still have a factory rear sight dovetail. It will not fit optics-ready models like the P226 Legion RX, P229 RX, or P320 X-Carry, since those slides are already cut for an optic.

Do I need to have my slide milled to use this mount?

Not at all. That's the whole point of this setup. You simply remove the factory rear sight and drop the EGW mount into the existing dovetail, so there's no machining or permanent modification to the slide.

What optics work with this EGW sight mount?

It uses the Docter footprint, so it accepts the Vortex Viper and Venom, Burris FastFire series, Docter, UTG Reflex Micro Dot, Crimson Trace CTS-1200 and CTS-1300, and Sightmark Mini Shot. The box includes button head screws for the Viper and Venom and flat head screws for the FastFire and Docter.

Can I put my original rear sight back on later?

Yes. Since the mount just sits in the rear sight dovetail, you can remove it and reinstall your factory rear sight whenever you want. A sight pusher tool makes swapping back and forth a lot smoother.

Additional information

UPC

841370112920

Manufacturer

Manufacturer Part Number

49318

Color

Black

Length

4.7500

Model

Style

Tactical

Reviews

There are no reviews yet.

Be the first to review “EGW Sight Mount for Vortex Viper/Venom – SIG P220-229/320 Black”