Description
The EGW LPA Sight Mount gives you a clean, direct way to put a red dot on a 1911 that has an LPA rear sight cut. Instead of sending your slide out for milling, you pull the factory rear sight and press this mount into the existing dovetail. That means no permanent changes to your pistol and the freedom to pop the mount back off and reinstall your original sight whenever you want.
This one is specific to the LPA dovetail, so make sure that's the cut your slide has before ordering. It's built from 7075 aluminum and wears a matte black hardcoat finish, which is the same tough, lightweight combo EGW uses across their optic mount line. The mount measures 1.811 inches long and .99 inches wide, keeping the optic sitting low and close to the bore for a natural, fast sight picture.
What the EGW LPA Sight Mount Fits
The mount uses the Docter footprint, so it covers a wide range of popular open-emitter optics. That includes the Vortex Viper and Vortex Venom (open emitter, not the enclosed version), the Burris FastFire series, Docter sights, and several others sharing that pattern. If you're running a closed-emitter enclosed Venom, this isn't the mount for it, so stick with an open-emitter red dot and you're set.
Installing the EGW LPA Mount
This is a press-fit dovetail mount, and a sight pusher tool makes the job much easier since the dovetail runs tight by design. The mount installs from left to right with the muzzle pointing forward, and the dovetail has a progressive taper that helps it slide in during the fit. All the mounting hardware comes in the box, with button head screws for the Vortex optics and flat head screws for FastFire and Docter sights. A dab of blue Loctite on the screws and torque to 15 in/lbs and your dot is locked in. The whole mount and its hardware are made in the USA.
Key Specifications
- Manufacturer: EGW (Evolution Gun Works)
- Manufacturer Part Number: 49317
- UPC: 841370112913
- Fits: 1911 with LPA rear sight cut
- Optic Footprint: Docter / FastFire / Viper / Venom (open emitter)
- Material: 7075 Aluminum
- Finish: Matte Black Hardcoat
- Color: Black
- Mount Type: Rear Sight Dovetail Replacement
- Overall Length: 1.811 in
- Overall Width: .99 in
- Torque Spec: 15 in/lbs
- Made In: USA
What’s Included
- EGW LPA sight mount
- 2 button head cap screws (for Vortex Viper and Venom)
- 2 flat head cap screws (for Burris FastFire and Docter)
- 1 set screw
- Mounting hardware
Frequently Asked Questions
Will the EGW LPA sight mount fit my 1911?
This mount is cut specifically for 1911 slides that have an LPA rear sight dovetail. Before ordering, confirm your pistol uses an LPA cut rather than a GI, Novak, or other profile, since those use different EGW mounts. It covers a broad list of LPA-cut models from makers like Sig Sauer, Springfield, STI, and Rock Island.
Which optics does this mount work with?
It uses the Docter footprint, so it fits the Vortex Viper, open-emitter Vortex Venom, the Burris FastFire series, Docter sights, and other red dots sharing that pattern. It does not fit the enclosed-emitter version of the Venom, so plan on running an open-emitter dot.
Do I need any tools to install the EGW LPA mount?
This is a press-fit dovetail mount and the fit is intentionally tight, so a sight pusher tool makes installation much smoother. You install it from left to right with the muzzle facing forward, add blue Loctite to the screws, and torque them to 15 in/lbs. All the mounting hardware you need comes in the box.
Does mounting this require permanent changes to my slide?
No. It replaces your factory rear sight using the existing dovetail, so there's no milling or permanent modification involved. You can remove the mount and reinstall your original rear sight whenever you like.




Reviews
There are no reviews yet.