Description
If you've ever tried to reach out past 100 yards with a .22 and run out of scope adjustment, this is the fix. The EGW 30 MOA Picatinny base takes your Ruger 10/22 beyond the limits of a flat mount by building a 30 MOA forward cant right into the rail. That angle gives your optic back the elevation travel it needs so you can dial for distance instead of fighting a maxed-out turret. It's a one-piece design machined from domestic 6061 T6 extruded aluminum and finished in matte black anodizing, so it stays light while holding zero shot after shot.
Why the 30 MOA Cant Matters on a 10/22
The .22 LR drops fast, and that steep trajectory eats up your scope's internal adjustment in a hurry at longer ranges. The 30 MOA built-in angle on this EGW rail puts you back in the usable middle of your turret's travel, which keeps your reticle crisp and your clicks consistent. For plinking steel at distance, NRL22 style matches, or just stretching your rimfire's legs, this is the elevation edge that makes it doable.
Fit and Build of the EGW 10/22 Picatinny Base
This mount is cut specifically for the Ruger 10/22 receiver with a 2.57 inch center spread and an overall length of 6.276 inches, sitting roughly 0.4 inches above the receiver. The full-length Picatinny cross slots let you position standard Picatinny or Weaver rings exactly where you need them, and the channel milled down the center trims weight while helping keep factory iron sights usable in many setups. It's ambidextrous and made entirely in the USA, right down to the hardware and packaging. Worth noting: this base fits the standard 10/22 and will not fit the 10/22 Takedown.
Easy Install, Repeatable Zero
Mounting is straightforward. The base secures with the included #6-48 screws using the provided T-10 bit, and EGW recommends torquing the hardware to 20 in/lbs for a secure, consistent hold. Because it's a true MIL-STD Picatinny platform, you can swap optics between rifles and get back to zero without the headache of dovetail rings.
Key Specifications
- Manufacturer: Evolution Gun Works (EGW)
- Manufacturer Part Number: 46103
- UPC: 841370112074
- Fits: Ruger 10/22 (not Takedown)
- Rail Type: One-Piece Picatinny (MIL-STD)
- Elevation Cant: 30 MOA
- Material: Domestic 6061 T6 Extruded Aluminum
- Finish: Matte Black Anodized
- Overall Length: 6.276 in
- Center Spread: 2.57 in
- Height: Approx. 0.4 in (top of receiver to top of rail)
- Mounting Hardware: #6-48 x 1/4 Screws
- Torque Spec: 20 in/lbs
- Ambidextrous: Yes
- Country of Origin: USA
What’s Included
- EGW Ruger 10/22 one-piece 30 MOA Picatinny rail base
- #6-48 x 1/4 mounting screws
- T-10 bit
Frequently Asked Questions
What does the 30 MOA cant on this EGW 10/22 rail actually do?
The 30 MOA built-in angle tilts your optic slightly forward, which gives back elevation travel in your scope's turret. That matters with .22 LR because the round drops quickly at distance and can run a flat mount out of adjustment. For long-range rimfire plinking or matches, this keeps you in the usable part of your turret.
Will this Picatinny base fit a Ruger 10/22 Takedown?
No, this base is cut for the standard Ruger 10/22 receiver and will not fit the 10/22 Takedown model. EGW makes a separate rail for the Takedown version. If you have a standard 10/22, this is the correct fit.
What rings do I need with this EGW 10/22 scope mount?
It uses standard Picatinny or Weaver-style rings, which are not included. The full-length cross slots let you set your rings for the right eye relief and ring spacing for your optic. Pick ring height based on your scope's objective diameter.
Does it come with everything needed to install it?
Yes, the base ships with the #6-48 mounting screws and a T-10 bit, so you can mount it right out of the package. EGW recommends torquing the screws to 20 in/lbs for a secure, repeatable hold. A dab of thread locker on the screws is a good idea if you want extra insurance against loosening.



Reviews
There are no reviews yet.