Description
If you're looking to put a quality optic on your Howa 1500 or Weatherby Vanguard short action, this EGW Steel HD rail is about as dependable as it gets. It's a one-piece Picatinny base machined from solid 4140 carbon steel, which means it isn't going anywhere once you torque it down. The steel construction gives it an edge in rigidity over aluminum rails, and it drills right onto the factory scope mount holes on your receiver with no gunsmithing needed.
What Sets the Steel HD Howa 1500 Rail Apart
The cross slots run the full width of the mount and are gauged to MIL-STD 1913 specs, holding tolerances of plus or minus .002 inches. That precision matters when you're mounting rings and want everything to line up true. The rail measures 6.670 inches overall with a 3.886 inch center spread, and it sits roughly .35 inches high from the top of the receiver. After machining, the rails are sand blasted and finished with a Mil Spec parkerized coating for solid rust resistance out in the field.
Fitment and Setup on Your Vanguard or Howa 1500
This base fits the Howa 1500 Short Action and Weatherby Vanguard Short Action, and it'll also work on older Ruger M77s with radiused receivers. It does not fit the Howa 1500 Superlite, so keep that in mind. It covers the popular short action calibers like .223 Rem, .22-250, .243 Win, 6.5 Creedmoor, 7mm Rem Mag, and .308 Win. The rail accepts both Picatinny and Weaver rings, so you've got flexibility on your ring choice.
Getting the Most Out of It
The 0 MOA configuration is the right call for most hunting and general shooting inside 500 yards, giving you a flat baseline to work from. EGW recommends torquing the screws to 20 inch pounds with a drop of blue Loctite for a mount that stays put shot after shot. It's made in the USA and comes ready to install with the hardware included.
Key Specifications
- Manufacturer: EGW (Evolution Gun Works)
- MPN: 86400
- UPC: 841370109630
- Model: Howa 1500 / Weatherby Vanguard
- Action Length: Short Action
- Elevation: 0 MOA
- Mount Type: One-Piece Picatinny Rail
- Material: 4140 Carbon Steel
- Finish: Mil Spec Parkerized
- Color: Black
- Center Spread: 3.886 inches
- Overall Length: 6.670 inches
- Height: Approx. .35 inches (receiver to top of rail)
- Spec Standard: MIL-STD 1913, +/- .002 inch tolerance
- Ring Compatibility: Picatinny or Weaver
- Country of Origin: USA
What’s Included
- EGW Steel HD Howa 1500 / Weatherby Vanguard Short Action 0 MOA Picatinny rail
- Socket head Torx mounting screws
- Torx wrench/bit
Frequently Asked Questions
Will this EGW rail fit my Weatherby Vanguard?
Yes, this base is made for the Weatherby Vanguard Short Action as well as the Howa 1500 Short Action, since the two share the same receiver. It'll also fit older Ruger M77s with radiused receivers. It will not fit the Howa 1500 Superlite, so if that's your rifle you'll want a different mount.
Do I need to drill and tap my receiver to install the Steel HD rail?
No drilling or tapping required. The rail is drilled to line up with the factory scope mount holes on your receiver, so it bolts right on. EGW recommends torquing the screws to 20 inch pounds with a drop of blue Loctite for a secure hold.
What's the difference between the 0 MOA and 20 MOA versions?
The 0 MOA rail sits flat with no built-in cant, which is ideal for shooting inside about 500 yards where you want a neutral baseline. The 20 MOA option adds downward taper to give you more elevation adjustment for longer range work out past 500 yards. For most hunting and general use, the 0 MOA is the way to go.
What scope rings work with this Howa 1500 Picatinny rail?
Since this is a true Picatinny base machined to MIL-STD 1913 specs, it accepts both Picatinny and Weaver style rings. That gives you a lot of flexibility in ring height and brand. The full-length cross slots also let you slide your rings fore and aft to dial in proper eye relief.



Reviews
There are no reviews yet.