Description
If you've been running irons on your Mossberg and want to add a red dot or scope, this EGW Heavy Duty Picatinny rail is the clean way to do it. It's a one-piece base machined from solid 7075 T6 aircraft-grade aluminum and finished in a matte black hardcoat, giving you a full-length rail that drops the guesswork out of mounting rings and optics. The cross slots run the entire length, so you've got plenty of room to get your sight positioned exactly where your cheek weld wants it.
Built to Fit the Whole Mossberg Lineup
This rail covers the Mossberg 500 (both early pre-'97 and late post-'97 receivers), the 590, the 835, and the 930 and 935 autoloaders. EGW ships it with both #6-48 and #8-40 screws plus a T-10 Torx bit, so whichever vintage your shotgun is, you've got the right hardware in the box. The 930 and 935 use the shorter front screws, and it's worth taking a second to measure your receiver hole spacing before you start so everything lines up the way it should.
Why the Heavy Duty EGW Rail Earns Its Keep
This is the beefed-up version of EGW's shotgun base, and it sits roughly a tenth of an inch lower than their standard rail for a better co-witness and a lower optic height over the bore. It's also quick-disconnect ring compatible and works with either Picatinny or Weaver style rings. Folks running it on turkey guns and home-defense 12 gauges consistently note how well it holds zero through heavy slug and buckshot loads.
Installation is straightforward: pull any factory plugs from the receiver, set the mount in place, add a drip of blue thread locker, and torque the screws down. The whole job takes a few minutes with the included bit, and once it's locked in, it stays put.
Key Specifications
- Manufacturer: EGW (Evolution Gun Works)
- MPN: 80800
- UPC: 841370109234
- Fits: Mossberg 500, 590, 835, 930, 935 (Post-'97)
- Rail Type: One Piece Picatinny
- Material: Solid 7075 T6 Aircraft Grade Aluminum
- Finish: Matte Black Hardcoat Anodized
- MOA: 0 MOA
- Overall Length: 5.882 in
- Center Spread: 2.125 in
- Height (Receiver to Rail Top): 0.35 in
- Weight: 2.5 oz
- Ambidextrous: Yes
- Quick Disconnect Ring Compatible: Yes
- Ring Compatibility: Picatinny or Weaver
- Color: Black
What’s Included
- EGW HD Mossberg one-piece Picatinny rail
- #6-48 x 1/4 mounting screws
- #8-40 x 1/4 mounting screws
- T-10 Torx bit
Frequently Asked Questions
Which Mossberg shotguns does this EGW HD rail fit?
It fits the Mossberg 500 (early pre-'97 and late post-'97), 590, 835, 930, and 935. EGW includes both #6-48 and #8-40 screws so it covers the different receiver drilling across those models and manufacturing years. The 930 and 935 use the shorter front screws that come in the box.
Does the EGW Mossberg Picatinny rail come with mounting hardware?
Yes. The package includes both sets of mounting screws (#6-48 and #8-40) along with a T-10 Torx bit, so you have what you need to install it. EGW recommends a drip of blue thread locker and torquing the screws to spec for a lasting hold.
What's the difference between the HD rail and the standard EGW Mossberg rail?
The HD version is machined from solid 7075 T6 aluminum and sits roughly a tenth of an inch lower than the standard rail, giving you a lower optic height over the bore. It's also quick-disconnect ring compatible. The standard rail is built from 6061 aluminum and sits slightly taller.
Will this rail work with my Picatinny or Weaver scope rings?
It's a true Picatinny-style base with cross slots running the full length of the rail, so it accepts both Picatinny and Weaver style rings. That gives you plenty of positioning options for a red dot, scope, or other optic to get your eye relief dialed in.





Reviews
There are no reviews yet.