0
0

EGW HD Springfield 03A3/03A4 1-Piece Picatinny Base 0 MOA

UPC: 841370108992

$62.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The EGW HD Springfield 03A3/03A4 Picatinny base is the clean, reliable way to put a modern scope on one of the most respected bolt guns ever built. It's a one-piece rail machined from solid 7075 T6 aircraft-grade aluminum, then tumbled, sandblasted, and Type III hardcoat anodized so it holds up to years of range time and field use. At a 0 MOA cant, it keeps your scope level with the bore, which is exactly what you want for general shooting and most work inside roughly 500 yards.

What makes this mount smart is how it handles recoil. Rather than relying only on screws, it uses the rifle's dovetail as the recoil shoulder, so the rail stays put shot after shot under the thump of a .30-06. Full-length Picatinny cross-slots give you plenty of room to slide rings forward or back and dial in proper eye relief, and it plays nicely with quick-detach ring setups if you like pulling your glass on and off.

Built to Fit the 03A3 and 03A4

This base is designed around the Springfield 03A3, Springfield 03A4, and Remington 03A3 receivers. It's the drilled version, matched to the factory hole pattern on these rifles. Because receiver hole spacing can vary a bit from gun to gun, it's always worth measuring your receiver against the published dimensions before you start the install.

Specs That Matter on the EGW 03A3/03A4 Rail

The rail runs 5.488 inches long with a 4.1 inch center spread and sits .35 inches from the top of the receiver to the top of the Picatinny, keeping your optic low and close to the centerline. At roughly 2.5 ounces it adds almost nothing to the overall feel of the rifle. Socket head Torx screws and the matching wrench come in the box, so you've got the hardware to get it mounted right. For anyone bringing a vintage Springfield or Remington bolt gun into the optics era, this is a straightforward, well-made upgrade.

Key Specifications

  • Manufacturer: EGW (Evolution Gun Works)
  • Manufacturer Part Number: 80240
  • UPC: 841370108992
  • Rifle Fit: Springfield 03A3, Springfield 03A4, Remington 03A3
  • Elevation / Cant: 0 MOA
  • Rail Type: One-Piece Picatinny
  • Material: Solid 7075 T6 Aircraft-Grade Aluminum
  • Finish: Matte Black Type III Hardcoat Anodized
  • Overall Length: 5.488 in
  • Center Spread: 4.1 in
  • Height: 0.35 in (top of receiver to top of Picatinny)
  • Weight: 2.5 oz
  • Mounting Style: Drilled, factory hole pattern
  • QD Ring Compatible: Yes
  • Color: Black

What’s Included

  • EGW HD Springfield 03A3/03A4 one-piece Picatinny base (0 MOA)
  • Socket head Torx mounting screws
  • Torx wrench

Frequently Asked Questions

Which rifles does the EGW 03A3/03A4 Picatinny base fit?

It's designed for the Springfield 03A3, Springfield 03A4, and Remington 03A3 receivers. This is the drilled version matched to those rifles' factory hole pattern. Since hole spacing can differ slightly between individual receivers, measure yours against the published dimensions before installing.

What does 0 MOA mean on this mount, and should I get it over the 20 MOA?

0 MOA means the rail sits level with the bore, with no built-in forward cant. That's the right pick for general shooting and most distances inside about 500 yards. The 20 MOA version adds elevation for stretching out toward longer range, so go 0 MOA unless you're specifically chasing extended distance.

Does the EGW 03A3/03A4 base come with mounting hardware?

Yes. It ships with socket head Torx screws and the matching wrench, so you have what you need to get it mounted. You'll still supply your own Picatinny or Weaver scope rings to hold the optic.

Will this rail work with quick-detach scope rings?

It will. The base is quick-disconnect ring compatible, and the full-length Picatinny cross-slots give you room to position rings for proper eye relief. That makes it easy to pull your optic on and off while returning to zero.

Additional information

UPC

841370108992

Manufacturer

Manufacturer Part Number

80240

Color

Black

Model

Style

Picatinny Rail

Reviews

There are no reviews yet.

Be the first to review “EGW HD Springfield 03A3/03A4 1-Piece Picatinny Base 0 MOA”