0
0

EGW HD Picatinny Rail for Remington 7400 7600 750 Benelli, Black

UPC: 841370108961

$45.00

3 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

This EGW one-piece Picatinny rail gives your Remington or Benelli a modern, no-nonsense optic platform. It bolts right onto the factory Weaver 93 mounting holes and converts them into a full-length Picatinny rail, so you can run just about any scope ring or red dot you want. The Picatinny cross slots run the entire length of the base, which means you've got real flexibility to dial in eye relief and swap optics without fighting your setup.

Fit is the whole ballgame with a rail like this, and this one covers a lot of ground. It's made for the Remington 4, 6, 7400, 750, 7600, and 7615, plus the Benelli Auto, Super Black Eagle, Vinci, and M2, and the Stoeger M3000 and M3500 (post serial number 1368845). All of these share the Weaver 93 bolt pattern. Keep in mind some receivers didn't leave the factory drilled and tapped, so it's worth measuring your hole spacing before you install.

Why the HD Remington Picatinny Rail Holds Up

The heavy-duty version is machined from 7075 T6 aircraft-grade aluminum with a matte black hardcoat finish, so it shrugs off recoil and the elements without flinching. It's built ambidextrous and sits low to the receiver, which keeps your optic close to the bore line and makes for a clean, balanced setup. The center channel is milled out to trim weight, and in many cases the low profile won't block your factory iron sights.

Getting Your EGW Rail Installed Right

Everything you need to mount it comes in the box, including #8-40 socket head Torx screws and the matching T-10 bit. EGW recommends torquing to 20 inch-pounds with a drip of blue Loctite on the threads so it stays put through season after season. Whether you're setting up a 7600 for deer season or putting a red dot on your Benelli for turkeys, this is the kind of dependable base you mount once and forget about.

Key Specifications

  • Manufacturer: EGW (Evolution Gun Works)
  • Manufacturer Part Number (MPN): 80210
  • UPC: 841370108961
  • Rail Type: One-Piece Picatinny (Weaver 93 Footprint)
  • Material: 7075 T6 Aircraft-Grade Aluminum
  • Finish: Matte Black Hardcoat Anodized
  • Elevation: 0 MOA
  • Center Spread: 2.05 in
  • Overall Length: 5.488 in
  • Height: Approx. 0.35 in to 0.4 in (receiver to top of rail)
  • Weight: Approx. 2.5 oz
  • Ambidextrous: Yes
  • Ring Compatibility: Picatinny or Weaver scope rings
  • Mounting Hardware: #8-40 x 1/4 in socket head Torx screws
  • Color: Black

What’s Included

  • EGW HD one-piece Picatinny rail
  • #8-40 x 1/4 in socket head Torx mounting screws
  • T-10 Torx wrench/bit

Frequently Asked Questions

Which firearms does this EGW HD Picatinny rail fit?

It's designed for the Remington 4, 6, 7400, 750, 7600, and 7615, along with the Benelli Auto, Super Black Eagle, Vinci, and M2, and the Stoeger M3000 and M3500 made after serial number 1368845. These all share the Weaver 93 mounting pattern. If you're not sure, measure the hole spacing on your receiver and compare it to the published 2.05 inch center spread before ordering.

Do I need to drill and tap my receiver to install this rail?

On receivers that came drilled and tapped from the factory, it bolts right on with no gunsmithing. That said, some rifles and shotguns didn't leave the factory drilled and tapped, so it's smart to check the top of your receiver first. If yours isn't drilled and tapped, you'd need that done before installing.

What's the difference between this HD rail and the standard version?

The HD version is machined from tougher 7075 T6 aircraft-grade aluminum with a matte black hardcoat finish, while the standard rail uses 6061 aluminum. It also sits a touch lower to keep your optic closer to the bore line. For hard-use hunting and heavier recoil, the HD is the more rugged pick.

Can I mount a red dot or any scope rings on this rail?

Yes. The full-length Picatinny cross slots accept both Picatinny and Weaver style rings, so you've got plenty of room to position a scope for proper eye relief or drop on a red dot. The low, ambidextrous design also tends to leave factory iron sights usable in many setups.

Additional information

UPC

841370108961

Manufacturer

Manufacturer Part Number

80210

Color

Black

Length

8

Model

Style

Picatinny Rail

Reviews

There are no reviews yet.

Be the first to review “EGW HD Picatinny Rail for Remington 7400 7600 750 Benelli, Black”