0
0

EGW HD Remington 700, 722, 40X Short Action 0 MOA Picatinny Rail

UPC: 841370108831

$63.00

11 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

EGW's HD short action rail is the piece that turns a bare Remington receiver into a serious optic platform. This is the heavy-duty version in EGW's lineup, machined from solid 7075 T6 aircraft-grade aluminum and finished in a Type III matte black hardcoat that shrugs off scuffs and weather. At 0 MOA, it mounts your scope level with the bore, which is exactly what you want for hunting and target work inside roughly 500 yards where you don't need extra built-in elevation eating into your scope's adjustment range.

What the HD Remington 700 Rail Fits

The 80000 is cut for the Remington 700, 722, and 40X short actions, and it also covers a long list of 700-footprint rifles. That includes the Remington Ultimate Muzzleloader along with Bergara B14 short action models and several Christensen Arms short actions. Because so many rifles are built on the 700 pattern, this base has become a go-to foundation for a huge range of setups. If you're unsure, measuring your receiver hole spacing against the rail is always the smart move before you install.

One Piece, Full-Length Picatinny

This is a one-piece MIL-STD 1913 Picatinny rail, so the cross slots run the full length and give you real flexibility in where you clamp your rings. That matters when you're trying to get proper eye relief or need to slide a scope forward or back to clear a turret. It works with any standard Picatinny or Weaver rings, and the ambidextrous design means lefties and righties both get the same clean fit.

Installing the Remington 700 Short Action Base

EGW includes the hardware you need to get going, with #6-48 and #8-40 screws plus a T-10 bit in the box. The center spread runs 3.627 inches and the overall mount measures about 6.276 inches, with the rail sitting low and tight to the receiver. EGW recommends torquing the screws to around 20 inch-pounds with a drop of blue thread locker so your base stays put and your zero holds shot after shot.

Key Specifications

  • Manufacturer: Evolution Gun Works (EGW)
  • Manufacturer Part Number: 80000
  • UPC: 841370108831
  • Series: HD (Heavy Duty)
  • Fits: Remington 700, 722, 40X Short Action
  • MOA: 0 MOA
  • Action Length: Short Action
  • Rail Type: One-Piece Picatinny (MIL-STD 1913)
  • Material: 7075 T6 Aircraft-Grade Aluminum
  • Finish: Matte Black Hardcoat Type III Anodized
  • Center Spread: 3.627 in
  • Overall Length: 6.276 in
  • Ambidextrous: Yes
  • Ring Compatibility: Picatinny or Weaver
  • Recommended Torque: 20 in-lbs
  • Made In: USA

What’s Included

  • EGW HD Picatinny rail (0 MOA)
  • #6-48 x 1/4 mounting screws
  • #8-40 x 1/4 mounting screws
  • T-10 bit

Frequently Asked Questions

Will this EGW rail fit my Remington 700 short action?

Yes, the 80000 is machined specifically for the Remington 700, 722, and 40X short actions. It also fits several 700-footprint rifles including the Remington Ultimate Muzzleloader, Bergara B14 short action models, and some Christensen Arms short actions. Measuring your receiver hole spacing before installing is always a good idea to confirm the match.

What does 0 MOA mean and is it right for me?

A 0 MOA rail mounts your scope level with the bore, with no built-in elevation angle. That makes it the better pick for hunting and target shooting inside roughly 500 yards, where you don't need to preserve extra elevation in your scope. If you plan to dial way out past 600 yards or more, a 20 MOA rail would be the way to go instead.

What kind of rings do I need with this rail?

This is a standard MIL-STD 1913 Picatinny rail, so it works with any Picatinny or Weaver scope rings. Rings are not included, so you'll want to pick a set based on your scope's tube diameter and objective size. The full-length cross slots give you plenty of room to position rings for proper eye relief.

How should I install the EGW Remington 700 rail?

Clean the receiver holes, then thread in the included screws with a drop of blue thread locker and torque them to about 20 inch-pounds. The box comes with both #6-48 and #8-40 screws plus a T-10 bit, so you have what you need to get started. Taking your time with even, proper torque helps the base hold zero over time.

Additional information

UPC

841370108831

Manufacturer

Manufacturer Part Number

80000

Action

Color

Black

Length

8.2500

Model

Style

Picatinny Rail

Reviews

There are no reviews yet.

Be the first to review “EGW HD Remington 700, 722, 40X Short Action 0 MOA Picatinny Rail”