0
0

EGW Wilson/Nowlin Barrel Ramp Cutter 6″ M42 Cobalt 1911 Frame Tool

UPC: 841370108749

$104.99

4 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Fitting a Wilson or Nowlin-style ramped barrel to a 1911 means the frame has to be machined to accept it, and that's exactly what this EGW cutter is built to do. It's a 6" M42 cobalt center-cutting tool with a solid 1/2" shaft, ground flat on the bottom so you get a clean, square surface where the barrel feet make contact. Chuck it up in a lathe or milling machine, remove the frame's feed ramp, and you're set up to seat a ramped barrel the way it's meant to sit.

What the Wilson/Nowlin Ramp Cutter Actually Does

Beyond opening up the frame for a ramped barrel, this cutter is handy for truing up factory frames that aren't quite right from the start. A lot of production frames have small flaws that keep the barrel feet from making even contact, and cleaning that surface up means less battering and more balanced stress on the feet over time. That translates to a better fit and longer barrel life. It also does double duty for cleaning up the vertical impact surface on a non-ramped .45 frame.

Built From M42 Cobalt for the Long Haul

EGW makes this cutter from U.S.-sourced M42 high-speed tool steel, which holds an edge through repeated jobs and shrugs off the heat that comes with cutting steel frames. The one-piece design is a big deal here since there's nothing to work loose partway through a cut. The extended shank length is intentional too, giving you the reach to clear standard and full-length dust cover frames without fighting the setup.

This is a gunsmith-level tool, not a drop-in part, so it belongs in the hands of someone comfortable running a mill or lathe. Keep your speeds reasonable and let the cobalt do the work, and it'll give you clean cuts job after job.

Key Specifications

  • Manufacturer: EGW (Evolution Gun Works)
  • Manufacturer Part Number: 70700
  • UPC: 841370108749
  • Cutter Material: M42 Cobalt High-Speed Tool Steel
  • Length: 6 in
  • Shaft Diameter: 1/2 in
  • Cutter Style: Center-cutting, flat ground bottom
  • Design: One-piece solid shaft
  • Barrel Compatibility: Wilson and Nowlin-style ramped 1911 barrels
  • Frame Compatibility: Standard and long/full-length dust cover frames
  • Recommended Use: Lathe or milling machine
  • Country of Origin: USA

What’s Included

  • 6" Wilson/Nowlin Barrel Ramp Cutter (1)

Frequently Asked Questions

What is the Wilson/Nowlin Barrel Ramp Cutter used for?

It's used to machine a 1911 frame so it can accept a Wilson or Nowlin-style ramped barrel. You run it in a lathe or milling machine to remove the frame's feed ramp and create a clean, square impact surface for the barrel feet. It can also clean up the vertical impact surface on a non-ramped .45 frame.

What material is this EGW ramp cutter made from?

The cutter is made from U.S.-sourced M42 cobalt high-speed tool steel. That grade holds an edge through repeated cuts and handles the heat generated when machining steel frames, which keeps it sharp over the long haul. The solid one-piece design means there's nothing to loosen up during a job.

Will this cutter work with full-length dust cover frames?

Yes. The 6" length and extended shank are designed to clear both standard and long dust cover frames. That reach lets you set up cleanly without the tool bottoming out or crowding the frame.

Is this a drop-in part or does it require machining?

This is a gunsmithing cutter, not a drop-in part. It's meant to be used in a lathe or milling machine by someone comfortable with those setups. Keeping cutting speeds conservative helps you get clean results and extends the life of the tool.

Additional information

UPC

841370108749

Manufacturer

Manufacturer Part Number

70700

Reviews

There are no reviews yet.

Be the first to review “EGW Wilson/Nowlin Barrel Ramp Cutter 6″ M42 Cobalt 1911 Frame Tool”